Software Instruction Manual

TurboVUi Dispatch Software Installation and Configuration Guide
10
DISPATCH CLIENT INSTALLATION
Prior to installing the TurboVUi Dispatch Client software, any required TurboVUi IP Gateways should be installed. See
TurboVUi IP Gateway Installation Guide S2-61534 for additional details.
INSTALL AUDIO AND PTT ACCESSORIES
Install any required microphones, speakers, headsets, and push-to-talk devices. Allow the Windows operating system to
discover these devices and automatically install device drivers before continuing.
INSTALL TURBOVUI DISPATCH CLIENT SOFTWARE
Insert the installation CD (S2-61506) into the CD ROM drive. If the installation does not auto-start, double-click the file
named “setup.exe” to start.
The TurboVUi Dispatch Client must have “Run as Administrator” enabled as follows:
1. Right-click on the TurboVUi Dispatch icon on the desktop, then click Properties from the menu.
2. On the Compatibility tab, under the Privilege Level topic, place a check in the box for Run this program as an
Administrator.
INSERT THE USB HARDWARE KEY
Insert the USB Hardware Key into a USB port of the PC. The included USB 6” extension cable
may be used to connect the USB Hardware Key to the PC. The USB Hardware Key must remain
inserted into the USB port for operation of the TurboVUi Dispatch Software.