TurboVUi™ Solo Software Installation and Configuration Guide For Version 6 Software Document # S2-61568-609 Please check the accompanying CD for a newer version of this document
TurboVUi Solo Software Installation and Configuration Guide Contact Information Support, replacement part ordering, and service may be arranged by contacting our Cincinnati office. Parts for service can be returned following request of a Return Material Authorization. CTI Products, Inc. 1211 W Sharon Rd Cincinnati, OH 45240 513-595-5900 support@ctiproducts.com Disclaimer Information in this document is provided with best efforts for completeness and accuracy.
TurboVUi Solo Software Installation and Configuration Guide INTRODUCTION The TurboVUi Solo client presents a virtual radio on a PC’s desktop. With a PC or Laptop, and a network connection, group or private calls are as easy as making a selection from the subscriber list, then clicking the Push-to-Talk button.
TurboVUi Solo Software Installation and Configuration Guide TURBOVUI SOLO CLIENT SOFTWARE INSTALLATION The TurboVUi Solo Client is available from the following sources: Distribution CD - “TurboVUi IP Gateway”, Part Number S2-61565. Distribution CD - “TurboVUi Dispatch”, Part Number S2-61506. Download Site - www.ctiproducts.com/TurboVUiUpgradeDownloads.html The TurboVUi Solo Client may be installed on as many PCs as needed.
TurboVUi Solo Software Installation and Configuration Guide RUN THE TURBOVUI SOLO CLIENT Did you connect a microphone yet? If not, go to the previous section Connect a Microphone. 1. Double-click the TurboVUi Client icon 2. The Connect window will be displayed as shown to the right. a. Use the TurboVUi Gateway field to enter the IP Address of the TurboVUi IP Gateway.
TurboVUi Solo Software Installation and Configuration Guide TURBOVUI SOLO CLIENT CONFIGURATION SETTINGS MENU Change Password This menu item allows the current user to change his password. Client General tab The General tab of this menu item displays options for customizing the operation of the TurboVUi Solo Client program. Make TurboVUi always on top of other windows This option will keep TurboVUi above all other windows that are open on the client PC.
TurboVUi Solo Software Installation and Configuration Guide It is recommended that the microphone being used is selected in the Recording Devices drop-down box. For Audio Quality, select High Quality or Compressed. See the following table for a comparison of these two modes of audio transfer. High Quality Compressed Bandwidth per voice stream (one talk group) 22kBytes/sec 2.
TurboVUi Solo Software Installation and Configuration Guide Radio Aliases The Radio Aliases tab of this menu item allows a Client logged in as “admin” to add or edit an alias name for a user. Admin The Admin tab of this menu item allows a Client logged in as “admin” to see information about the Gateway as well as the ability to Reboot the Gateway or use Remote Assistance.
TurboVUi Solo Software Installation and Configuration Guide ADDING A DESKTOP SHORTCUT A Desktop shortcut can be implemented that includes the TurboVUi IP Gateway address, Username, and Password. This can be useful if the user wishes to bypass the TurboVUi Solo Login window. Use the following command line form in the Properties window of the TurboVUi desktop icon (Properties > Shortcut tab > Target): TurboVUi.
TurboVUi Solo Software Installation and Configuration Guide ALIAS NAMES ADDING INDIVIDUAL ALIAS NAMES To build an Alias Table, one entry at a time, use the following steps: 1. From the Settings menu, choose Gateway, and then choose the Radio Aliases tab to show the following window: 2. Right-click on the table to show the following menu options. 3. For each Alias Name to be entered, choose either Add Radio Alias or Add Group Alias.
TurboVUi Solo Software Installation and Configuration Guide 4. From the Settings menu, choose Gateway, and then choose the Radio Aliases tab to show the following window. 5. Right-click on the table to show the following menu options. 6. Click on Clear Aliases to clear all of the existing Alias Names. 7. Right-click on the table to show the following menu options. 8. Choose Import List, and then select the file created in Steps 1-3 above.
TurboVUi Solo Software Installation and Configuration Guide FEATURE AVAILABILITY Depending on MOTOTRBO System Type or TurboVUi Solo edition, some features may not be available. Use the following tables to determine if a feature discussed in this document is not available. FEATURES BASED ON MOTOTRBO SYSTEM TYPE Use the following table to determine if a feature is not available for a MOTOTRBO System Type. System Type Analog Conv.