User's Manual M730V LCD Monitor
Federal Communications Commission (F.C.C.) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2 INTRODUCTION ............................................................................................... 3 Product Description ................................................................................... 3 Package Overview ...................................................................................... 3 Recommended Use of the Monitor .............................................................
English IMPORTANT SAFETY INSTRUCTIONS Please read the following instructions carefully. This manual should be retained for future reference. 1. To clean the LCD Monitor screen make sure the Monitor is in the power off mode. Unplug the Monitor from its power source before cleaning it. Stand away from the LCD Monitor and spray cleaning solution onto a rag. Without applying excessive pressure clean the screen with the slightly dampened rag. 2. Do not place your LCD Monitor near a window.
English INTRODUCTION Product Description Your LCD monitor incorporates high quality display, solid structure and multimedia savvy. With user-friendly interfaces, user will enjoy the professional PC application as well as Audio Video performances. In addition, it has power-saving capabilities and emits no X-ray radiation.
English INTRODUCTION Recommended Use of the Monitor • Power – Use the type of power indicated on the marking label. • Plugs – Do not remove any of the prongs of the monitor's three-pronged power plug. – Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time. • Power cords – Use the proper power cord with correct attachment plug type. If the power source is 120 VC, use a power cord that has UL and CSA approvals.
English INTRODUCTION The Guideline of Operation Angle of LCD Monitor 1. Unpack the monitor from Carton box. 2. Put the monitor on a flat table. 3. To hold the base of monitor with one hand and pull the frame of panel of monitor, let the panel up with base on the vertical position. 4. To a d j u s t t h e m o n i t o r i n a comfortable view position, please change the tilt angle of panel of monitor in an optimal position. 5. The normal operation range is forward 5 degrees to backward 47 degrees.
English INTRODUCTION The Camera Function in LCD Monitor The Built-in Camera and Microphone are useful tools which enable internet study, net meeting, chat, and other entertainment purposes & functions.
Once you have installed this monitor with your system, please read the instructions in this section, It provides you some guidelines on how to use the monitor more efficiently, and lead you through the various functions of the user controls and explain how to adjust the monitor to your personal preference. Front User Controls (1) "ESC" button To close the OSD(On Screen Display) manual and to escape function or audio mute.
English CONTROLS AND ADJUSTMENTS On Screen Display (OSD) Main menu 1. Press " ↵ " to open the OSD main menu. 2. Use the "∇" and " ∆ " arrows to move through the displayed functions. 3. Press " ↵ " to confirm your selected function. When the main screen starts, there are following functions to choose 1. Auto-Tune (It is disabled in DVI Mode) When selecting “Auto-Tune”, wait for a few seconds, the monitor will auto-adjust Clock, Phase, H-position and V-position to their optimal level.
2. Color To enter this item menu, you can choose either the Auto Color, Color 1, Color 2, Color 3, Best Color and User mode. Auto Color It is disabled in DVI Mode Color 1 Color 2 3. English CONTROLS AND ADJUSTMENTS Image To enter this item menu, here are some items which can be adjusted as below. Auto Geometry It is disabled in DVI Mode Clock Mode It is disabled in DVI Phase Mode It is disabled in DVI Color 3 H.Position DVI Mode It is disabled in Best Color V.
English CONTROLS AND ADJUSTMENTS 4. 7. OSD Setting To enter this item menu, it can be adjusted OSD position and OSD timeout. Choosing Input Signal mode. VGA H. Position DVI V. Position 5. Center 8. OSD timeout To enter this item menu and you can adjust Surround, Mute or Source. Language Audio setting Surround To select the OSD languages between English, German, French, Spanish, Italian, Chinese, Japanese or Russian . Mute Source Audio 1 Audio 2 ~ 9. 6.
Energy Declaration This monitor is equipped with a function for saving energy, which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer. The time settings for switching to a power saving mode are adjusted from the system unit by software. From the first indication of inactivity to power saving position the total time must not be set to more than 70 minutes. 1. VESA Power-Management Proposal VESA DPMS Standard H. sync V.
English TROUBLESHOOTING Troubleshooting If you are experiencing trouble with the LCD display refer to the following. If the problem persists please contact your local dealer or our service center. The monitor does not respond after you turn on the system. • Check if the monitor is turned on. • Turn off the power and check the monitor power cord and signal cable are properly connected. The characters on the screen are dim.
English TECHNICAL INFORMATION Compatibility This LCD monitor supports multiple operating platforms such as IBM compatible computers. This section provides you with detailed information on pin assignment of the D-Sub/DVI connector and the preset timing chart of the prevailing video standards. VGA Pin Assignment 1 5 6 10 16 11 Signal Red Video Green Video Blue Video Horizontal Sync Vertical Sync Ground No Connection SDA (DDC) SCL (DDC) N.C.
English TECHNICAL INFORMATION DVI Pin Assignment DVI Connector Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment 1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1- 17 T.M.D.S. Data 0- 2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data0+ 3 T.M.D.S. Data 2/4 Shield 11 T.M.D.S. Data 1/3 Shield 19 T.M.D.S. Data 0/5 Shield 4 No Connect No Connect 20 No Connect No Connect 12 5 No Connect 13 No Connect 21 6 DDC Clock 14 +5V Power 22 T.M.D.S.
English TECHNICAL INFORMATION Specifications LCD Panel [Monitor] Effective display size Resolution (max.