PV722E User’s Manual U s e r ’ s M a n u a l PV722E 1
PV722E User’s Manual Table of Contents 1. Important Safety Instructions 3 2. Introduction 8 3. Recommended Use of the Monitor 15 4. Controls and Adjustments 17 5. Energy Declaration 28 6. Trouble Shooting 29 7. Technical Information 31 8. Product Overview 33 9.
PV722E User’s Manual Important Safety Instructions FCC Statement This equipment has been tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PV722E User’s Manual TCO'99 TCO99 compliant monitors must be compliant with TCO99 which is more stringent than MPRII. The purchase of TCO99 compliant monitors contributes to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method-for encouraging the adaptation of goods and services to the environment.
PV722E User’s Manual The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability.
PV722E User’s Manual Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches.
PV722E User’s Manual 2. Do not place your LCD Monitor near a window. Exposing the Monitor to rain, water, moisture or sunlight can severely damage it. 3. Do not place anything on top of the Monitor/PC signal cord. Make sure the cord is placed in an area where it will not be stepped on. 4. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 5. Do not remove the cover or attempt to service this unit by yourself. You may void the warranty.
PV722E User’s Manual Introduction Product Description Congratulations on purchasing this new generation monitor. Your LCD monitor incorporates high quality display into a small lightweight module. It has power- saving capabilities and emits no X-ray radiation. The features are: 1. 17" TFT Liquid Crystal Display 2. Wide-Viewing Angle 3. Compatible with IBM VGA, VESA 4. Direct RGB input 5. DVI input 6. SXGA 1280x1024 resolution 7. Lightweight compact design, weighing less than 7.5Kg 8.
PV722E User’s Manual Package Overview Your monitor package contains: LCD Monitor User's Guide / Driver CD Power Cord Power Adapter D-Sub 15 VGA Signal Cable DVI Cable USB Hub 3.5 mm Audio Cable Speaker Box CAUTION Keep the shipping carton in case the need arises to store or transport the unit. Let the LCD lie on its face when you put it into the carton.
PV722E User’s Manual Installation & Remove 1-1. Installing the Portrait 1-2.
PV722E User’s Manual 2-1. Rotating to the mode "Portrait" (vertical orientation) 3-1. Installing VESA-compliant Connecting Device* This product provides square screw holes that conform to 100mm*100mm VESA-compliant connection interface. *User should prepare the connection device for VESA themselves.
PV722E User’s Manual 4-1. Speaker Box Install 5-1.
PV722E User’s Manual 6-1.Kensington security slot Cabling for Your Display 1. Turn off the power of your computer and other devices. 2. Connect (1) the video signal cable of the monitor to the 15-pin connector of the video port in your computer. 3. With the monitor switched off, attach (2) the power cord to the monitor and then to a grounded power outlet. 4. Connect (3) the DVI Cable of the monitor to the DVI connector of the DVI port in your computer.
PV722E User’s Manual 5. Connect your audio cable one end to the external speaker, through the connector of audio input on the rear part; the other end to audio device (such like connector of the sound card in the PC). 6. Connect to the earphone plug-in if you need this device. 7. Turn on the monitor and computer. 8. If necessary, adjust the front panel controls according to your personal preference.
PV722E User’s Manual Recommended Use of the Monitor Power Use the type of power indicated on the marking label. Plugs Do not remove any of the prongs of the monitor's three-pronged power plug. Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time. Power cords Use the proper power cord with correct attachment plug type. If the power source is 120 V AC, use a power cord that has UL and CSA approvals.
PV722E User’s Manual Environment Place the monitor on a flat level surface. Place the monitor in a well-ventilated place. Keep the monitor away from: rain or water overly hot, cold or humid places sunlight dusty surroundings equipment that generates strong magnetic fields.
PV722E User’s Manual Controls and Adjustments Once you have installed this monitor with your system, please read the instructions in this section, they give you some guidelines on how to use the monitor more efficiently. And lead you through the various functions of the user controls and explain how to adjust the monitor to your personal preference. Front User Controls (1) Enter " " button To display the OSD manual and select functions.
PV722E User’s Manual (3) Up " " button To adjust the selected OSD function or the contrast directly. (4) "ESC" button To close the OSD manual and to escape function. (5) Power LED Indicator As long as the monitor is powered, this indicator is lit. In normal operation, it lights green. While in power saving mode, the indicator will turn to amber. (6) Power Switch To turn the monitor On or Off.
PV722E User’s Manual On Screen Display (OSD) Main menu (VGA) 1. Press " " to open the OSD main menu. 2. Use the " " and " " arrows to move through the displayed functions. 3. Press " " to confirm your selected function. Brightness Press the " " button to enter the brightness, and press the " " or " " button to increase or decrease the brightness level, then press " ESC" button to exit.
PV722E User’s Manual 1. Auto Tune Press " " button, the system will automatically adjust the clock, phase, H-position and V-position values for optimal settings. ADVANCE AUTO TUNE PATTERN PROGRAM USING GUIDE • As some VGA Card doesn't match the VESA standard. It can't out-put 0.7 V p-p VESA standard. Therefore, we need "ADVANCE AUTO TUNE PATTERN PROGRAM" to modify the parameters of monitor to match different output level of VGA card. • Auto_tune.
PV722E User’s Manual 2. Color You can choose either the 6500°K, 9300°K colour temperature mode or User mode to store your user defined color settings. Movie mode 1. Press " " button to enter Movie mode. 2. Press the " " or " " button to select the color sat., Tint, Flesh Tone, Brightness, Contrast, and Reset, then press " 3. " button to proceed. Finally, press "ESC" button to leave this function. User Mode 1. Press " 2.
PV722E User’s Manual 3. Image Here are some items can be adjusted as below, please press " " enter the item menu. Clock: Press the " " or " " button to adjust the width of the screen to a maximum. Phase: Press the " " or " " button to reduce the noise on the screen. Smooth: Press the " " or " " button to select "Yes" or "No" to enable "smooth". 4. Position To adjust the Image or OSD position.
PV722E User’s Manual 5. Language Press the " " or " " button to select between English, Spanish, German, Italian or French languages. 6. Reset Press the " " or " " button to select "Yes" or "No". Choosing Reset to callback all the settings for the current Input Signal mode to factory preset. 7. Source Press the " " or " "button to select input source.
PV722E User’s Manual On Screen Display (OSD) Main menu (DVI) 1. Press " " to open the OSD main menu. 2. Use the " " and " " arrows to move through the displayed functions. 3. Press " " to confirm your selected function. Brightness Press the " " button to enter the brightness, and press the " " or " " button to increase or decrease the brightness level, then press " ESC" button to exit.
PV722E User’s Manual 1. Color You can choose either the 6500°K, 9300°K colour temperature mode or User mode to store your user defined color settings. Movie mode 1. Press " 2. Press the " " or " " button to select the color sat., Tint, Flesh Tone, Brightness, " button to enter Movie mode. Contrast, and Reset, then press " 3. " button to proceed. Finally, press "ESC" button to leave this function. User Mode 1. Press " 2.
PV722E User’s Manual 2. Image Here are some items can be adjusted as below, please press " " enter the item menu. Smooth: Press the " " or " " button to select "Yes" or "No" to enable "smooth". 3. Position To adjust the Image or OSD position. Image Position or OSD Position H - Position: Press the " " or " " button to reposition of the picture or the OSD window to the right or left. V - Position: Press the" " button to moves the picture or the OSD window upwards and " " to move them downwards.
PV722E User’s Manual 4. Language Press the " " or " " button to select between English, Spanish, German, Italian or French languages. 5. Reset Press the " " or " " button to select "Yes" or "No". Choosing Reset to callback all the settings for the current Input Signal mode to factory preset. 6. Source Press the " " or " " button to select input source.
PV722E User’s Manual Energy Declaration T his monitor is equipped with a function for saving energy, which is compatible with VESA Display Power Management Signaling (DPMS) standard. The time settings for switching to a power saving mode are adjusted from the system unit by software. From the first indication of inactivity to power saving the total time must not be set to more than 70 minutes.
PV722E User’s Manual Trouble Shooting If you are experiencing trouble with the LCD display refer to the following. If the problem persists please contact your local dealer or our service center. The monitor does not respond after you turn on the system. Check if the monitor is turned on. Turn off the power and check the monitor power cord and signal cable are properly connected. The characters on the screen are dim.
PV722E User’s Manual No Signal Input The "No Signal Input" message indicates that the cable may not be plugged property into the host system. WARNING: Do not disassemble the monitor. Contact your dealer if needed.
PV722E User’s Manual Technical Information Compatibility This LCD monitor supports multiple operating platforms such as IBM compatible computers. This section provides you with detailed information on pin assignment of the D-Sub and DVI connector and the preset timing chart of the prevailing video standards.
PV722E User’s Manual Other Modes(VGA) 640*350 640*480 800*600 1024*768 1152*864 1280*720 1280*960 1280*1024 1280*1024 @70Hz @70Hz @70Hz @72Hz @60Hz, 70Hz, 72Hz @60Hz @60Hz, 70Hz, 72Hz, 75Hz @72Hz @70Hz Pin Assignment (DVI) DVI Connector 4 5 Signal Assignment T.M.D.S. Data 2T.M.D.S. Data 2+ T.M.D.S. Data 2/4 Shield T.M.D.S. Data 4T.M.D.S. Data 4+ 6 7 8 Pin 1 2 3 12 13 Signal Assignment T.M.D.S. Data 1T.M.D.S. Data 1+ T.M.D.S. Data 1/3 Shield T.M.D.S. Data 3T.M.D.S.
PV722E User’s Manual Product Overview Pivot Function You can turn the LCD panel right 90 degree for particular viewing.
PV722E User’s Manual Side View (unit: mm) For viewing clarity, you can tilt the LCD panel forward (up to 5 degrees) or backward (up to 20 degrees) Rear View (unit: mm) 34
PV722E User’s Manual Specifications LCD Panel 17" TFT LCD module with wide-viewing angle, 0.264(H)x0.264 (V)mm pixel [ Monitor ] Effective display size 17" (43.2 cm diagonal) Resolution (max.
PV722E User’s Manual [ Audio ] Audio Input 1V(p-p), Max. Audio Output 1W X 2(RMS) USB Hub 2.0 [ Dimension & Weight ] Size (WxDxH) 433 x 166 x 447 mm Weight (net) 7.
