Instructions / Assembly

ManualsBrandsCub Cadet ManualsKitchenFront Bumper for Fast-Attach and Box-Frame Riding Mower

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

Printed In USA

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

In s t a l l a t I o n Ma n u a l

Universal Front Bumper Kit — Model 190-679

Form No. 769-03712A

(February 11, 2009)

Summary of content (4 pages)

PAGE 1
Installation Manual Universal Front Bumper Kit — Model 190-679 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No.
PAGE 2
1 To The Owner Thank You Thank you for purchasing a Front Bumper kit manufactured by MTD LLC. It was carefully engineered to provide excellent performance when properly installed and maintained. Please read this entire manual prior to installing and operating the equipment. It instructs you how to safely and easily install this bumper kit onto your machine. All the information in this manual is relative to the most recent product information available at the time of printing.
PAGE 3
2 Contents of Carton Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below. Hardware part numbers are shown in parentheses. QTY DESCRIPTION PART NO. (1) Universal Bumper Assembly (683-04219A) (2) Screw, 5-16-18 x 0.750 (710-1260A) (2) Quick Release Pin, .50 dia. x .50 lg.
PAGE 4
3 Installation Instructions WARNING! Before beginning installation, place the tractor on a firm and level surface. Place the PTO in the disengaged (OFF) position, stop the tractor engine and set the parking brake. NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end.