Instructions / Assembly

START BY LAYING OUT THE PARTS.

ALWAYS READ YOUR OWNER’S

MANUAL.

MOUNT ASSEMBLY ON TRACTOR

a. Place hooked ends of the mounting assembly over

the shoulder bolts, use the clevis bolt and hairpin clip

to secure bracket to tractor

INSTALL HANGER ASSEMBLY

a. Use hanger position C, secure using the carriage bolt

and wing knob

b. Place hanger assembly onto the upright support

bracket, secure using two carriage bolts and two

1/2” lock nuts and washers

ASSEMBLE MOUNTING BRACKETS

a. Attach the two side brackets to the rear attachment, use

two carriage bolts and the wing knobs to secure them

b. Flip over the assembly and mount the hitch support

bracket, use the holes furthest away from the rear

hooks and use two carriage bolts and the wing

knobs to secure them

XT™ SERIES BAGGER

ASSEMBLY GUIDE

HOW TO ASSEMBLE THE DOUBLE BAGGER ON AN XT™ LAWN TRACTOR

(CONTINUED ON NEXT PAGE)

PAGE 1
XT™ SERIES BAGGER ASSEMBLY GUIDE HOW TO ASSEMBLE THE DOUBLE BAGGER ON AN XT™ LAWN TRACTOR 1 START BY LAYING OUT THE PARTS. ALWAYS READ YOUR OWNER’S MANUAL. 2 ASSEMBLE MOUNTING BRACKETS a. Attach the two side brackets to the rear attachment, use two carriage bolts and the wing knobs to secure them 3 4 MOUNT ASSEMBLY ON TRACTOR a. Place hooked ends of the mounting assembly over the shoulder bolts, use the clevis bolt and hairpin clip to secure bracket to tractor INSTALL HANGER ASSEMBLY a.
PAGE 2
XT™ SERIES BAGGER ASSEMBLY GUIDE 5 ASSEMBLE REMAINING BAGGER a. Snap the upper chute support into place 6 INSTALLING THE CHUTE a. Install the boot rod mount using the 7/16” nuts (2 wrenches are used) b. Slide the boot rod into the deck, secure the boot with a wing knob b. Slide the left side into the upper chute support using the tabs c. Align the cover tabs with the chute support, slide hinge pin in place d. Add the bags c.