OPERATOR’S MANUAL Cub Cadet Hybrid/UV Cart 19A40037100 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No.
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor/ATV/UTV attachment. Follow all safety rules and operating instructions provided by your vehicle's manufacturer when using attachment. Never allow children or untrained persons to operate vehicle or attachment.
Carton Contents 2 (x1) 20 (x1) 1 (x1) 3 (x1) 33 (x1) 11 (x2) 4 (x2) 12 (x2) 10 (x4) 9 (x2) 5 (x2) 34 (x2) 8 (x2) 13 (x4) 6 (x1) 14 (x8) 15 (x12) 16 (x12) 7 (x1) 19 (x2) 31 (x2) TOOLS REQUIRED FOR ASSEMBLY: • • 1/2" Wrench and Socket 9/16" Wrench and Socket • • 3 Needle-Nose Pliers Grease Gun 17 (x1)
1 Assembly Instructions 14 Attach Undercarriage to Poly Body and tighten hardware. 1 2 15 16 2 Attach Front Support to Poly Body and tighten hardware. 13 3 15 16 3 Insert Stub Axles into Undercarriage and secure with pins as shown.
4 Assembly Instructions Slide Washers, Spacers and Wheels onto Stub Axles and install Cotter Pin. Bend legs of Cotter Pin to secure. 10 9 8 5 Align holes in Swivel Clevis and Undercarriage and install Pin as shown. Secure Pin on both ends with Hairpins. 34 20 34 6 19 4 10 33 Insert Hitch into Drawbar and tighten hardware. Install Hitch Pin as shown. 6 7 31 17 DO NOT OVERTIGHTEN, HITCH MUST SPIN FREELY.
Operating Instructions Before Using Dump Cart: 1. Apply lithium grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel. 2. Check tire pressure and inflate to 24 psi if needed. 3. Read all Safety Rules found on page 1. How to Use Dump Cart: 1. Attach Dump Cart to your ATV or UTV as shown below. 2. Do not exceed 1250 pounds when loading material into the cart body. 3.
Do-It-Yourself Accessories 13.00 35.13 31.63 USE 1/2" PLYWOOD 35.25 USE STANDARD 2 X 4 34.00 13.00 16.00 45.00 13.00 13.
Notes 8
CUB CADET LLC LIMITED WARRANTY FOR ATTACHMENTS AND ACCESSORIES LIMITED WARRANTY The limited warranty set forth herein is given by Cub Cadet LLC with respect to new attachments and/or accessories (hereinafter “Attachments”) purchased and used in the United States and/or Canada to the Initial Purchaser (as defined herein). For Canadian sales, the warranty is provided by MTD Products Limited.
FA CT S NUINE E G O R Y PA R T To order replacement parts, call a Customer Support Representative at (800) 965-4CUB. Locate your nearest Cub Cadet dealer at (877) 282-8684 or visit www.cubcadet.com to find the nearest Cub Cadet dealer in your area. CUB CADET LLC, P.O.
