Specification

13Section 6 — Maintenance
6. Attach the air filter cover, making sure to align plastic rib
features on the shroud to the plastic features on the air

until snug. Check for any misalignment.
Plastic Rib
Feature
Shroud
Plastic
Feature
Air Filter
Cover
Figure 6-8
Spark Plug Service
WARNING: DO NOT check for spark with spark
plug removed. DO NOT crank engine with spark
plug removed.
To ensure proper engine operation, the spark plug must be
properly gapped and free of deposits.
1. Remove the spark plug boot and use a spark plug wrench

Spark Plug
Spark Plug Boot
Figure 6-9
3. Remove the foam pre-filter from around the paper air

damaged. Clean foam element or replace when damaged.
Air Filter
Pre-Filter
Figure 6-6
4. To clean foam element, wash in a mild liquid detergent and
water. Squeeze or press the foam element to rinse out dirt

element. Allow to dry thoroughly before using. DO NOT oil
the foam element.
5. Attach the new air filter with foam element, aligning the

Intake
Manifold
Figure 6-7