Use and Care Manual

18
PRODUCT CARE
First 20
hours
First 50
hours
Every
50
hours
Every
100
hours
Every
150
hours
Every
200
hours
Every
300
hours
Every
500
hours
Every
3900
hours
Every
year
Every
2 years
Every
4 years
Replace brake hose & pipe
Check tires
Change axle case oil Adjust engine valve clearance Check fuel injection Check injection Check CV shaft boots Check exhaust system Check wheel bearings Check engine timing Change brake fluid
Replace remote
hydraulic hose
Replace rear brake
cylinder seal
Replace front brake
cylinder seal
Flush cooling system
Change engine coolant
* -- Have this item performed by an authorized service dealer # -- Perform more often in dry conditions and/or when mulching
PRESTART CHECKLIST
• Check parking brake. Make sure the parking brake indicator
light comes on when the parking brake is ON.
• Inspect the instrument panel for broken gauges and
warning lamps.
• Check the headlights and turn signals. Replace if broken.
• Check seat belt and OPS. Do not operate utility vehicle until
repaired if either is broken.
• Check the joint boots on the drive shaft for damage. If the
joint boots are damaged, see an authorized service dealer.
• Check tire pressure. See Tire Pressure in this section.