Use and Care Manual

9
OPERATION
A
C
K
B
J
M
N
D
M
L
G
F
E
H
I
D
Figure 1
FEATURES
Refer to Figure 1 for the location of the features described below.
A. FUEL CAP
The fuel cap is located on the right side of the vehicle to the rear
of the passenger door.
B. BUMPER
The bumper is located on the front of the utility vehicle.
C. HEADLIGHTS
The headlights are located on the front of the utility vehicle
and are illuminated when the headlight switch is in the
“ON“ position.
D. TURN SIGNALS
The turn signals are on the front and rear of the vehicle and are
activated by the turn signal switch.
E. DOOR HANDLES
The door handles are used to open the doors and are located on
the doors.
F. CARGO BED
The cargo bed is used to haul materials and is located on the back
of the utility vehicle. See the Specifications chart for information
on cargo bed capacity and dimensions.
G. CARGO BED RELEASE LEVERS
The cargo bed release levers are located on both the RH and LH
side of the cargo bed and are used to dump/tilt the cargo bed.
H. BRAKE LIGHTS
The brake lights are located on the rear of the cargo bed and are
illuminated by depressing the brake pedal or when the hazard
button is in the “ON” position.
I. TAIL LIGHTS
The tail lights are illuminated when the headlight switch is
turned to the “ON” position.
J. TAILGATE
The tailgate is located on the rear of the cargo bed and can be
opened by using the tailgate lever.
K. TAILGATE LEVER
The tailgate lever is located on the tailgate and is used to open
the tailgate.
L. HAND GRIP
The hand grip is located on the passenger side of the utility
vehicle on the OPS.
M. MIRRORS OPTIONAL, IF EQUIPPED
The mirrors are located on the passenger and driver’s side of the
vehicle and are used to see behind the utility vehicle.
N. WINCH
The winch is located on the front of the utility vehicle inside the
bumper. The winch is controlled by the winch control.