Operator`s manual
21se c t i O n 6 — Ma i n t e n a n c e & ad j u s t M e n t s
Cleaning the Tractor
Any fuel or oil spilled on the machine should be wiped off
part of the machine, especially the belts and pulleys.
Cleaning the Engine Intake Screen
The engine intake screen area is located on the lower half of the
dash. It is important to keep this area free of debris. Clean this
Smart Jet™
part of its deck wash system.
underside and prevent the buildup of corrosive chemicals.
Drive the tractor to a level, clear spot on your lawn, near
enough for your garden hose to reach.
CAUTION:
chute is directed AWAY from your house, garage,
parked cars, etc.
2.
and stop the engine.
Attach the hose coupler to the water port on your deck. 4.
Turn the water on.5.
6.
position.
7.
position.
8.
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
into the
position to turn the
Turn the water off and detach the hose coupler from the
Keep the cutting deck running for a minimum of two minutes,
allowing the underside of the cutting deck to thoroughly dry.
Nozzle Adapter
Adapter Lock Collar
Deck Wash Nozzle
Figure 6-5
Engine Intake Screen
Figure 6-4