Operator`s manual

22 se c t i O n 6 — Ma i n t e n a n c e & ad j u s t M e n t s

an equivalent No. 2 multipurpose lithium grease, through
the grease fitting.
Close the tractor hood4.
Steering Shaft
The steering shaft should be lubricated after every 25 hour of
operation. To access its lube fitting, proceed as follows:
Working beneath the left side of the tractor frame, locate 

Fig 6-8.
2.
an equivalent No. 2 multipurpose lithium grease through
the steering shaft lube fitting.
Deck Wheels

grease fitting. Lubricate with a No. 2 multi-purpose grease
applied with a grease gun after every 25 hours of tractor
operation.
Pivot Points & Linkage
Lubricate all the pivot points on the drive system, parking brake
and lift linkage at least once a season with light oil.
Lubrication
WARNING! 

brake, stop engine and remove key to prevent
unintended starting.
Front Wheel Axles
Each of the front wheel axles and rims is equipped with a


multipurpose lithium grease.
Steering Housing
The steering housing should be lubricated after every 25 hour of
operation. To access its lube fitting, proceed as follows:

Locate the grease fitting for the steering housing under the 2.

Grease Fitting
Figure 6-8
Grease Fitting
Figure 6-7
Grease Fitting
Figure 6-6