Operator`s manual

28 se c t i O n 7— se r v i c e

8.





Move the lift lever into the top notch to raise the lift links 

up and out of the way.

NOTE: 

lever in the L position and use the lift switch to raise the lift

links up and out of the way.

Gently slide the cutting deck toward the front of the  

tractor, carefully guiding the hooks on the deck off the

front hanger.

Gently slide the cutting deck (from the right side) out from 

underneath the tractor.

NOTE: For larger decks it may be necessary to turn the

wheels to remove the deck.

Mounting the Deck

WARNING! 

parking brake and remove the ignition key before

mounting the cutting deck.



to raise the lift links up and out of the way.

NOTE: 

lever in the L position and use the lift switch to raise the lift

links up and out of the way.

From the right side, carefully slide the cutting deck under 2.

the tractor.

NOTE: Carefully positioning a piece of 2x4 under the

center, rear of the cutting deck to raise it up slightly will aid

in completing the following steps.





Use the lift switch to lower the lift links into the lowest 4.

cutting position.

Locate the deck support pin found on the left bracket and 5.

pull it outward. Align it with the hole in the lift link before

releasing it to secure the pin in place. Repeat on the right



Figure 7-4

Figure 7-5

Figure 7-6