Manualshelf

Instructions / Assembly

ManualsBrandsCub Cadet ManualsLawn TractorsLT 46 in. Fabricated Deck 547cc Fuel Injected Engine Gas Hydrostatic Lawn Tractor with Push Button Start
12
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
INSTANT INSTALL
778-13400A
1
TOOLS NEEDED
• Flathead
screwdriver
• Channel
locks or ⁄"
wrench
• Ratchet w/
⁄” socket
• 6” socket
extension
• Wrench, ⁄”
• Wrench, ⁄”
RIDER PREP
ATTACHING THE HOOD
Locate the four holes in
the hood topper.
Once locked into place,
check the alignment on
the area circled above.
Once in position, slide the
hood topper back until all
four lock into place.
Position those holes over
the four "T" posts on the
hood.
2
ATTACHING THE DASH
Locate the five hooks on
the dash cover. And the
center locking tab.
Once in place, close
the hood and check the
alignment.
Slide the dash cover back
towards the engine to lock
into place. Push down in the
center of the center locking
tab to ensure it is hooked.
Position the five hooks
into the holes on the top
of the dash.
Un-crate the
rider and lay out
the hood topper,
dash cover and
steering wheel
for easy access.
Watch for staples
when rolling the
tractor off the
pallet.

Summary of content (2 pages)