Manualshelf

Instructions / Assembly

ManualsBrandsCub Cadet ManualsLawn TractorsXT1 Enduro Series LT 50 in. Fabricated Deck 24 HP V-Twin Kohler Gas Hydrostatic Front-Engine Lawn Tractor
12
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
INSTANT INSTALL
778-13400B
1
TOOLS NEEDED
• Flathead
screwdriver
• Channel
locks or ⁄"
wrench
• Ratchet
w/ ⁄”/⁄"
socket
• 6” socket
extension
• Wrench, ⁄”
• Wrench, ⁄”
RIDER PREP
ATTACHING THE HOOD
Locate the four
holes in the hood
topper.
Once locked into
place, check the
alignment on
the area circled
above.
Once in position,
slide the hood
topper back until
all four lock into
place.
Position those
holes over the four
"T" posts on the
hood.
2
ATTACHING THE DASH
Locate the five
hooks on the dash
cover and the
center locking tab.
Once in place,
close the hood
and check the
alignment.
Slide the dash
cover back towards
the engine to lock
into place. Push
down in the center
of the center
locking tab to
ensure it is hooked.
Position the five
hooks into the
holes on the top
of the dash.
Un-crate the
rider and lay out
the hood topper,
dash cover and
steering wheel
for easy access.
Watch for staples
when rolling the
tractor off the
pallet.
A
D
C
B
A
D
C
B

Summary of content (2 pages)