User Manual

• Re move the large shoul der bolt and
washer on the left hand side of the en -
gine pul ley with an ad just able wrench.
See Fig ure 15.
NOTE: Ref er ence to right hand or
left hand side of ma chine are ob -
served from the op er at ing po si tion.
• Re move the cot ter pin and washer from
the fer rule in or der to dis con nect the
au ger idler rod from the brake bracket
as sem bly as shown in Fig ure 16.
• Slip the au ger drive belt (the front belt)
off the en gine pul ley. See Fig ure 18.
• Pull the brake bracket as sem bly to -
wards the ca ble guide roller and
un hook the au ger ca ble “Z” fit ting. See
Fig ure 16.
• Re move the top screws and
lockwashers which at tach the au ger
hous ing as sem bly to the frame as sem -
bly. A 9/16" wrench is re quired. See
Fig ure 17.
• Sep a rate the au ger hous ing from the
frame as sem bly by tilt ing the hous ing
for ward and pull ing up the han dles.
• Rest the han dle as sem bly on the
ground and tip the re main ing half for -
ward to rest on the hous ing.
To Re move the Au ger Drive Belt:
a. Using a 9/16" wrench re move the five
belt keep ers and lockwashers from
around the au ger pul ley. See Fig ure 18.
b. Re move and re place au ger drive
belt.
c. Re place lockwashers and belt keep ers.
NOTE: The au ger pul ley mount ing
bolt has chem i cal patch which sets
af ter bolt is as sem bled. If the bolt
is re moved for any rea son it must
be re placed.
NOTE: The brake puck in the brake
bracket as sem bly must al ways be
firmly seated in the pul ley groove
when the au ger clutch le ver is in
the dis en gaged po si tion.
13
FIG URE 17
Re move
Screw
and Lock
Washer
Frame
As sem bly
Au ger
Housing
FIG URE 16
“Z”
Fitting
Brake
Bracket
As sem bly
Au ger
Idler
Rod
Fer rule
Ca ble Roller Guide
Cotter
Pin and
Washer
FIG URE 18
Au ger Drive
Belt
Brake Bracket
As sem bly
Belt Keeper (5)
Lockwasher (5)
Pul ley
Auger Pulley
Mounting
Bolt