Operator`s manual

Troubleshooting
8
20
Problem Cause Remedy
Wheels/Tines will not turn 1. Improper use of controls.
2. Worn, broken, or misadjusted drive belt(s).
3. Internal transmission wear or damage.
4. Bolt loose in transmission pulley.
1. Review Operation section.
2. Replace or adjust belts.
3. Contact authorized service dealer.
4. Tighten bolt.
Tines turn, but wheels don’t 1. Wheel Drive Pins not in WHEEL DRIVE.
2. Bolt loose in transmission pulley.
3. Internal transmission wear or damage.
1. Inserts Drive Pins properly.
2. Tighten bolt.
3. Contact authorized service dealer.
Wheels turn, but tines Don’t 1. Tine holder mounting hardware missing.
2. Bolt loose in transmission pulley.
3. Internal transmission wear or damage.
1. Replace hardware.
2. Tighten bolt.
3. Contact authorized service dealer.
Poor tilling performance 1. Worn tines.
2. Improper Depth Regulator setting.
3. Incorrect throttle setting.
4. Forward Drive Belt slipping.
1. Replace Tines.
2. See “Tilling Tips & Techniques.”
3. See Maintenance & Adjustments Section.
4. See Maintenance & Adjustments Section.