MSDS

Spectrum Lubricants Corporation
500 Industrial Park Drive
Selmer, TN 38375
MATERIAL SAFETY DATA SHEET
SECTION 1 -- IDENTIFICATION
Product Trade Name:
Arnold 10W30 Engine Oil
Part Number: OL-420-MG; LM0320AR
Revision Date: 11-14-05
Phone Number: [phone]
Fax Number: [phone]
E-mail Address:
[e-mail]
Emergency Number: 800-424-9300 after 5:00 p.m.
Chemical Family: Petroleum Lubricating Oil
NOTE: Petroleum lubricating oils with a flashpoint above 200°F, are not regulated by D.O.T. standards.
SECTION 2 -- HAZARDOUS INGREDIENTS
Name CAS # Approximate % Regulatory Agency Exposure Limit
Base Oil (mixture) 64742-54-7 80-90 OSHA/ACGIH 5mg/m3 Mist
Performance Additive proprietary 4-13 OSHA/ACGIH 5mg/m3 Mist
Pour Depressant proprietary < 2 OSHA/ACGIH 5mg/m3 Mist
Zinc Compounds proprietary < 1 OSHA/ACGIH 5mg/m3 Mist
HMIS/NFPA CODES
Health Flammability Reactivity Protective Equipment
1 1 0 C, D
See Section 6, Chronic Effects, for potential over-exposure hazard.
SECTION 3 -- PHYSICAL DATA
Vapor Pressure (mmHg) at 20°C: < 1
Specific Gravity at 60°F: 0.88 to 0.90
Water Solubility: Insoluble
Boiling Point: > 750°F
Vapor Density (Air=1): > 1
Evaporation Rate (BUAC=1): 0.001
Odor: Mild Hydrocarbon Odor
Appearance: Light to Dark Amber Colored Liquid
Viscosity at 100°C CST: 9.3 to 12.5
SECTION 4 -- FIRE AND EXPLOSION HAZARDS
Flash Point: 425°F
Fire Point: 455°F
Extinguishing Media: Water Fog, Chemical Foam, Dry Chemical
Powder, CO2
Special Firefighting Procedures: Cool exposed containers with water spray.
Avoid breathing fumes.
Unusual Fire and Explosion Hazards: Pressure increase in over heated closed
containers. Cool containers with water spray.