Timing Deck Striper/Roller Operator's Manual

ManualsBrandsCub Cadet ManualsPower RollerTiming Deck Striper/Roller

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

Printed In USA

Op e r a t O r ’s Ma n u a l

Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

BEFORE ATTEMPTING TO OPERATE THIS MACHINE.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

42” Timing Deck Striper/Roller

Form No. 769-03885

(February 19, 2008)

Summary of content (8 pages)

PAGE 1
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty Operator’s Manual 42” Timing Deck Striper/Roller WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No.
PAGE 2
3 Assembly & Set-Up Contents of Carton • One 42” Timing Deck Striper/Roller • One Operator’s Manual Assembly NOTE: On older model decks the holes used to attach the Striper/ Roller to the mowing deck will have to be drilled in order to install the attachment. 1. Remove the attached carriage bolts and flange nuts from the mounting bracket. See Fig. 1-1. 2. On the back center of the deck, lay the bracket on a spot on the deck that will not interfere with any of the belts, blades, etc. under the deck.
PAGE 3
Set-Up The roller can be adjusted to two different heights. 1. Remove the cotter pins and clevis pins from each side of the Striper/Roller. See Fig. 1-3. Cotter Pin Clevis Pin Clevis Pin Figure 1-3 2. Move the adjustment bracket to the desired height and replace the cotter pin and clevis pin to lock into place.
PAGE 4
2 Illustrated Parts List 7 11 6 8 4 2 10 3 4 9 14 3 7 14 12 10 2 5 13 8 Ref. 4 1 Part Number Description 1. 710-0451 Carriage Bolt, 5⁄16-18 x .750 2. 711-1421 Clevis Pin, 3⁄8 x .750 3. 712-04063 Flange Lock Nut, 5⁄16-18 4. 714-0149B Cotter Pin 5. 726-04035 Push Nut, 3⁄4 6. 731-0335 Deck Roller 7. 731-06365 Deck Roller, 2.25 x 5.25 8. 736-0188 Flat Washer, .76 x 1.49 x .06 9. 736-3024 Flat Washer, .469 x .750 x .06 10. 738-0296 Shoulder Screw, .437 x .
PAGE 5
Notes 5
PAGE 6
Notes
PAGE 7
Notes 7
PAGE 8
NUINE E G T S FA CT O R Y PA R To order replacement parts, call a Customer Support Representative at (800) 965-4CUB. Locate your nearest Cub Cadet dealer at (877) 282-8684 or visit www.cubcadet.com to find the nearest Cub Cadet dealer in your area. CUB CADET LLC, P.O.