SDS

SAFETY DATA SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
FormulaShell SAE 10W-30 Motor Oil
Version
1.5
Revision Date:
10/02/2018
SDS Number:
800001028894
Print Date: 10/03/2018
Date of last issue: 03/15/2018
8 / 16
Upper explosion limit / upper
flammability limit
:
Typical 10 %(V)
Lower explosion limit / Lower
flammability limit
:
Typical 1 %(V)
Vapour pressure
:
< 0.5 Pa (20 °C / 68 °F)
estimated value(s)
Relative vapour density
:
> 1
estimated value(s)
Relative density
:
0.8677 (15.0 °C / 59.0 °F)
Density
:
867.7 kg/m3 (15.0 °C / 59.0 °F)
Method: ASTM D4052
Solubility(ies)
Water solubility
:
negligible
Solubility in other solvents
:
Data not available
Partition coefficient: n-
octanol/water
:
log Pow: > 6
(based on information on similar products)
Auto-ignition temperature
:
> 320 °C / 608 °F
Decomposition temperature
:
Data not available
Viscosity
Viscosity, dynamic
:
Data not available
Viscosity, kinematic
:
69.98 mm2/s (40.0 °C / 104.0 °F)
Method: ASTM D445
10.63 mm2/s (100 °C / 212 °F)
Method: ASTM D445
Explosive properties
:
Not classified
Oxidizing properties
:
Data not available
Conductivity
:
This material is not expected to be a static accumulator.
SECTION 10. STABILITY AND REACTIVITY
Reactivity
:
The product does not pose any further reactivity hazards in
addition to those listed in the following sub-paragraph.