Operator`s manual

Maintenance & Adjustments
6
19
Maintenance Schedule
Before
Each use
Every
10 Hours
Every
25 Hours
Prior
to Storing
Clean Battery Terminals
P P
Lube Front Caster Wheels and Wheel Spindles
P P
Check Engine Cooling Fins for Debris (Clean as
Necessary)
P P
Lube Deck Spindles
P P
Lube Pedal Pivot Points
P P
Maintenance
WARNING! 

and remove key to prevent unintended starting.
Engine

procedures and instructions.
NOTE: Maintenance, repair, or replacement of the emission control

be performed by any engine repair establishment or individual.
Warranty repairs must be performed by a Cub Cadet Dealer.
Changing the Engine Oil
WARNING! If the engine has been recently run, the
engine, muffler and surrounding metal surfaces will
be hot and can cause burns to the skin. Exercise
caution to avoid burns.
To complete an oil change, proceed as follows:
Run the engine for a short time to warm the engine oil. The 
oil will flow more freely and carry away more impurities.
Use care to avoid burns from hot oil.
Locate the oil drain port on the right side of the engine.2.


Oil Filler
Oil Fill Cap/Dipstick
Oil Drain Valve
Oil Fill Tube
Figure 6-1