Operator`s manual
22 se c t i O n 6— Ma i n t e n a n c e & ad j u s t M e n t s
Drive the tractor to a level, clear spot on your lawn, near
enough for your garden hose to reach.
CAUTION:
chute is directed AWAY from your house, garage,
parked cars, etc.
and stop the engine.
2.
Attach the hose coupler to the water port on your decks
Turn the water on.4.
5.
position.
6.
7.
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
8.
position.
Turn the water off and detach the hose coupler from the
deck running for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly dry.
Lubrication
WARNING!
brake, stop engine and remove key to prevent
unintended starting.
Front Wheels
Each of the front wheel spindles and rims is equipped with a grease
applied with a grease gun after every 25 hours of tractor operation.
Pivot Points & Linkage
Lubricate all the pivot points on the drive system, parking brake
and lift linkage at least once a season with light oil.
Deck Spindle
purpose lithium grease. Using a grease gun, apply two strokes
(minimum) or sufficient grease to the spindle shaft.
Nozzle Adapter
Adapter Lock Collar
Deck Wash Nozzle
Figure 6-4
Grease
Fittings
Figure 6-5
Grease Fittings
Figure 6-6