User's Manual
INSTALLATIONINSTRUCTIONS
ProgrammableTirePressureMonitorSystem(”P‐TPMS”)SensorAssemblies
VS‐62U003(433.92MHz)
WARNING
Read all instructions and warnings, and review all illustrations before installing. For
reasons of safety and for optimal function, Shanghai Vei Sheng Auto Parts
ManufacturingCo.,ltd(“Cub”)recommendsthatanymaintenanceandrepairworkis
carried out by trained experts only and according to the guidelines of the vehicle
manufacture r. The valves are safety‐relevant parts which are intended for
professionalinstallationonly.
TheseProgrammableTire PressureMonitoring System(”P ‐TPMS”)sensorassemblies
are replacement or maintenance parts for motor vehicles that have a factory
installedTirePressureMonitoringSystem(”TPMS”)only.Failuretofollowinstallation
instructionsmayresultinthefailureofthemotorvehicleP‐TPMSsensortooperate
properly. Cub does not assume any liability in case of the faulty or incorrect
installationoftheproduct.
CAUTION
Each P‐TPMS sensor is designed and manufactured to operate in blank at initial
status which using the proper frequencies to communicate with the motor vehicle
TPM system. The original P‐TPMS is blank software inside, be sure to program the
sensor by Cub Gen.3 tool for your specific motor vehicle make, model and year
beforeinstallation.OnlyinstallprogrammedP‐TPMSsensorstotheapplicationlisted
in the tool. Improper TPMS installation or the use of unauthorized TPMS Sensors
cause the motor vehicle TPM System to fail to operate properly. Do not install
programmed P‐TPMS sensors in damaged wheels. Upon completion of installation,
test the motor vehicle TPMS System using procedures described in the original
manufacture r’s service guide to confirm proper installation.If the TPM System fails
to operate properly, check all installation procedures to ensure proper installation
andretest.IftheTPMSSystemcontinuestofailtooperate,
immediatelyconsultwith
Cubsupportoranauthorizedmotorvehicledealership.
These P‐TPMS sensor assemblies are designed and manufactured to operate in
OriginalEquipmentwheels andtiresonly. IfOriginal Equipmentwheelsand/ortires
are not used, the TPM system and the low tire inflation warning threshold of your
vehicle’s
TPM system may not function or may function correctly. If the Original
Equipment wheels and/or tires are not sued, it is the responsibility of the vehicle
ownertoensurethattheTPMSisworkingcorrectly.RefertotheOriginalEquipment
manufacture r’svehicleserviceguidefor instructionincluding thewarningthreshold
reset procedure and seek the assistance of an authorized vehicle dealership to
ensure the TPM system, including system compatibility with the non‐Original
Equipment wheels and/or tires, is working properly. The vehicle owner expressly
assumessoleandcompleteFailuretoensurethattheTPMSisworkingcorrectlycan
resultinsevereinjuryordeath.
WARRANTY