User's Manual

Documents Title
Rev
V1.3
BLE Tire Pressure Monitoring System
User Manual
Date
Jul 9, 2014
Page
6/13
6
5.2 Installation Step
(Fig 1) Loosen the tire. Fix both sides of the tire and press, and make it bulge.
(Fig 2) Remove the tire. The valve faces the mounting arm in the one o’clock direction,
remove the tire.
(Fig 3) Remove the sensor. Loosen the fixing screw, allow the sensor separate from the
valve, and release the nut to take it apart from the valve.
(Fig 4) Install the sensor and valve. Insert the valve through the rim hole, fix the screw to
secure the valve and sensor by 2 Nm in torque, attach the sensor body to the inner
surface of the rim by adjusting the angle of the sensor body.
(Fig 5) Install valve to the rim hole. Guide the washer into the valve, and fix the nut by 4
Nm in torque, then tighten the cap.
(Fig 6) Mount the tire. Grip the rim edge, and the valve is opposite to the mounting arm,
avoid hitting the sensor during arm operation.
After installation, please download APP to your smart phone, and proceed all settings.
(Please check the 7.1 Initial Setting)
Note 1：After installation, recalibrate the rim set on balance machine to avoid shaking
during driving.
Note 2：It does not include the “sensor valve” and “screw” in product warranty,
when replacing sensor, it is suggested to use new sensor valve and screw.
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
6. APP Download and Installation
6.1 Operation System Required
TPMS system supports both smartphone and pad, for Android & iOS system.
APP Download
Operation System
Compatible Smartphone
APPLE APP Store
iOS 7.1.1 and +
iPhone 5, 5S and +
Android Google Play Store
Android 4.3, 4.4 and +
Android Smart Phone