Operation Manual

| 43 42 |
MTB/ ROAD BIKE/ TREKKINGMTB/ ROAD BIKE/ TREKKING
8.6.2 SRAM gear shift
On your gear-shift there are two levers. Lever
A is for shifting to a larger chain ring or spro-
cket and Lever B for shifting to a smaller one.
1. Here is how you shift to a larger sprocket:
•
in order to shift you must be pedalling.
•
Press the lever down with your thumb bey-
ond the rst stop and keep it depressed until
the desired gear is selected.
•
For rapid shifting through several sprockets,
press the lever right down and keep it de-
pressed until the desired gear is selected.
2. Here is how you shift to a smaller spro-
cket:
•
in order to shift you must be pedalling.
•
Depress Lever B until you feel it engage and
then let it go again straight away.
8.6.3 Twist grip shift
On your shift grip, there is a ring which can
be rotated in either direction. By turning this
ring you shift into the next gear.
Depending on the manufacturer, you shift
into a higher or lower gear in one direction
of rotation. Details of the precise functioning
can be found in the accompanying parts
instructions and/or consult your dealer.
1. Here is how you shift with hub gears:
•
pedalling in order to shift.
•
Turn the rotating ring in the desired direc-
tion until the gear is selected.
2. Here is how you shift with derailleur
gears: to a larger sprocket
•
in order to shift you must be pedalling.
•
Turn the rotating ring until the desired gear
is selected.
•
For rapid shifting over several sprockets,
turn the rotating ring until the desired gear
is selected.
3. Here is how you shift to a smaller spro-
cket:
•
in order to shift you must be pedalling.
•
Turn the rotating ring until the desired gear
is selected.
•
For rapid shifting over several sprockets,
turn the rotating ring until the desired gear
is selected.
B
A
Lever A
Lever B
1. Here is how you shift to a larger spro-
cket:
•
In order to shift, you must be pedalling.
•
Press the lever down with your thumb
beyond the rst stop and keep it de-
pressed until the desired gear is selected.
8.6.1 Shimano Rapidre/ Shimano
Rapidre 2-Way-Release/
Shimano EZ Fire
On your gear-shift there are two levers. Lever
A is for shifting to a larger chain ring or spro-
cket and Lever B for shifting to a smaller one.
•
For rapid shifting through several spro-
ckets, press the lever right down and
keep it depressed until the desired gear is
selected.
2. Here is how you shift to a smaller
sprocket:
•
In order to shift you must be pedalling.
•
Depress (2-Way-Release only) or pull Lever
B until you feel it engage and then release
it again straight away.