AK80-64 AK Series Actuator Driver Manual V1.0.8
Table Of Contents
- Notice
- 1.Ensure that the circuit is normal and the interfac
- 2. The driver board will be hot when output, pleas
- 3. Please Check whether the parts are in good cond
- 4. Several optional control modes can’t be switche
- 5. Please use it strictly in accordance with the w
- Feature
- Disclaimer
- Version Change Record
- 1.Drive Product Information
- ①Three-phase wires connection port
- 2.R-link produce information
- 2.1 Introduction of R-link' appearance&Specificat
- 3. Actuator and R-link Connection and Notices
- Connection instructions: Connect the USB cable to
- 4. Instructions for use of the upper computer
- 1.Click Open File and select the firmware. The firmw
- 2.Click Bootloader.
- 3.Click download and wait for the progress bar to re
- 5. Driver board communication protocol and descrip
https://www.cubemars.com/
10 / 52
1.4 Main Accessories and Specifications
NO.
Item
Specification
QTY
Remark
1
Serial
communication
line
wire rod
24AWG-300MM-Teflon
silver-plated wire-black
yellow green
Each
1PCS
±2MM
pin
A1257H-3P
1PCS
A2541H-3P
1PCS
2
power line
wire rod
16AWG-200MM-Silicone
wire-red and black
Each
1PCS
±2MM
pin
XT30UPB-M
1PCS
XT30UPB-F
1PCS
3
CAN
communication
line
wire rod
24AWG-300MM-Teflon
silver-plated wire-white and
blue
Each
1PCS
±2MM
pin
A1257H-4P
2PCS
A2541H-2P
1PCS
4
Thermistor
MF51B103F3950-10K-3950
2PCS
5
Electrolytic
capacitor
120Uf-63V-10x12MM
2PCS
AK10-9
V2.0
standard
6
MOS power
BSC026N08NS5-80V-2.6mΩ
TPH2R608NH-75V-2.6mΩ
12PCS
Random