AK80-64 AK Series Actuator Driver Manual V1.0.8
Table Of Contents
- Notice
- 1.Ensure that the circuit is normal and the interfac
- 2. The driver board will be hot when output, pleas
- 3. Please Check whether the parts are in good cond
- 4. Several optional control modes can’t be switche
- 5. Please use it strictly in accordance with the w
- Feature
- Disclaimer
- Version Change Record
- 1.Drive Product Information
- ①Three-phase wires connection port
- 2.R-link produce information
- 2.1 Introduction of R-link' appearance&Specificat
- 3. Actuator and R-link Connection and Notices
- Connection instructions: Connect the USB cable to
- 4. Instructions for use of the upper computer
- 1.Click Open File and select the firmware. The firmw
- 2.Click Bootloader.
- 3.Click download and wait for the progress bar to re
- 5. Driver board communication protocol and descrip
https://www.cubemars.com/
5 / 52
Feature
The AK series actuators’ driver board adopts the driver chip with high-
performance, uses the Field Oriented Control (FOC) algorithm, and is
equipped with advanced active disturbance rejection control technology
to control the speed and angle. It is matched with our modular motor to
form a powerful power package. It can be used with CubeMars Tool
assistant software for parameter setting and firmware upgrade.
Disclaimer
Thank you for purchasing the AK series actuators. Before using, please
read this statement carefully. Once used, it is deemed to be an
endorsement and acceptance of the entire content of this statement.
Please strictly abide by the product manual and related laws, regulations,
policies and guidelines to install and use the product. In the process of
using the product, the user promises to be responsible for his actions
and all consequences arising therefrom.
CubeMars will not be liable for any losses caused by improper use,
installation, or modification by the user.
CubeMars is a trademark of JIANGXI XINTUO ENTERPRISE CO., LTD and
its affiliates. The product names, brands, etc. appearing in this article are
the trademarks of their respective companies. This product and manual
are copyrighted by JIANGXI XINTUO ENTERPRISE CO., LTD. Without