User Manual

26 Oct 05
This document contains proprietary and confidential information originated or owned by Cubic. Neither this document nor the information disclosed herein shall be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other purposes except as specifically authorized in writing by Cubic.
5500-62017.A.0
0
4
• A design capable of withstanding irregular input dc power and providing a means of
maintaining its operation without seriously disrupting the driver’s operation.
• A design meeting various mounting and ergonomic requirements on or next to the driver
dashboard;
• A design meeting the requirements for ease of software and hardware maintenance and
unit replacement aboard buses;
• Faster installation and removal times than DCU1 but this will initially (if necessary) be
accomplished via in line connector system
3.1 SPECIFICATION DETAIL
3.1.1 Electrical
Casework as DCU1 but option to provide mini USB via the bottom panel cutout
Keypad as DCU1 but with more granular backlighting & longer lasting keypad graphics
Power Supply as DCU1 but improved hold up time to 500 mSec
Improved Battery performance to support Real Time Clock, SRAM, & GPS for five years
4.7 inch diagonal ¼ VGA graphics LCD. Color Transflective STN 320 X240 (LED Backlight) with
more granular backlighting than DCU1
ARM11 Freescale iMX31 Processor with sleep modes
256MB DDR SDRAM
256MB NAND Flash
256 KByte SRAM with battery backup
One 10/100 Ethernet LAN
One V2.0 USB Ports
RS232 and RS422/RS485 x 1 - all opto isolated
TTL Serial port - internal GPS
Internal 802.11b/g (WPA2) via USB, with internal strip antenna
Internal Ublox LEA-5S GPS module via TTL serial port, Antenna via SMA Connector
Internal SD Slot –for up to 2GB SD Card
Internal Bluetooth
Internal 2-ch Stereo Speakers
Operating temperature -20°C to +60 °C except LCD
Other Environmental, EMC, FCC
3.1.2 Mechanical
Captive screws on CTS back panel.
Dimension: 230mm(W) x 160mm(H) x 92mm (D)
Weight: 1,714 g
3.1.3 OS and Software Support
• CE Builder
• IMG Info
WinCE for v 5.0 Requirements:
• Complete WinCE 5.0 BSP
• Include the following utilities