Application Guide

Abrasive Systems Division
3M Center, Building 223-6S-03
St. Paul, MN 55144 USA
Phone [phone]
Web 3M.com/Abrasives
3M, Cubitron, Hookit and Stikit are trademarks of 3M. Used under license in Canada.
Please recycle. Printed in USA. © 3M 2016. All rights reserved. 61-5002-8408-0
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can aect the use and performance
of a 3M product in a particular application. Given the variety of factors that can aect the use and performance of a 3M product, user
is solely responsible for evaluating the 3M product and determining whether it is t for a particular purpose and suitable for user’s
method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specically stated on the applicable
3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specication at the
time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY
IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product
does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of
the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty,
contract, negligence or strict liability.
8
Tech Tip
Start on… Stop o… A simple rule of thumb to prevent unnecessary
swirl marks on the work surface. Start the sander on the work surface,
stop the tool as it is removed from the work surface. For best results,
operate tool at 90 PSI air pressure.