3M™ Abrasives and Power Tools for Stainless Steel Finishing Now Inc ludes 3M ™ Fib re for Exce Disc 987C ptional Life! Systems for Stainless Steel Finishing The Efficient and Economical Way to Produce Exceptional Finishes.
3M™ Stainless Steel Finishing System — Wel Step 1 – Leveling the Weld Using the following products for weld leveling helps prepare stainless steel for #3 and #4 finishes. Recommended Starting Points NEW! 3M™ Cubitron™ II Fibre Disc 987C (Grade 60+; 7" diameter) • Made with 3M precision-shaped ceramic grain for ultra-fast cut and exceptional life. • Includes a grinding aid for cooler running temperatures.
ld Leveling to Final Finish in 3 Easy Steps Step 2 – Setting the Grain Step 3 – Final Finishing: Choos Use these products to generate a directional scratch to prepare stainless steel for final finishing. Generate a #3 through a #8 stainless steel finish with these 3M Products. Recommended Starting Point Recommended Starting Point for #3 Stainless Steel Finish 3M™ Belt 777F (Grade P120) • Contains 3M™ Ceramic Aluminum Oxide blend abrasive grain with polyester cloth backing.
se Your Finish Recommended Starting Point for #4 Stainless Steel Finish Scotch-Brite™ Surface Conditioning Belt (A Medium) • Constructed with a non-woven nylon material. • Designed for cleaning, finishing and light deburring. Recommended Tools and Speeds: • 3M™ Inline Sander (PN28338) — 1,600 RPM with 3M™ Expander Wheel (PN28348) 5" dia. • 3M™ Inline Sander (PN28339) — 3,500 RPM with 3M™ Expander Wheel (PN28349) 3.4" dia.
Level welds quickly to match #3 and #4 directional mill finishes In three easy steps, using the 3M finishing system, you can grind and blend welds to match #3 or #4 finishes. Step 1: Step 2: Step 3: Abrasive: 3M™ Cubitron™ II Fibre Disc 987C, 7", Grade 60, featuring 3M proprietary precision-shaped ceramic grain. Abrasive: Set directional grain with 3M™ Cloth Belt 777F, Grade P120. Tool: 3M™ Inline Sander (28339) 3,500 RPM with 3M™ Expander Wheel (28348/28349).
Right Angle Weld Grinding System 3M offers a complete system using coated abrasive and surface conditioning belts for leveling, blending and finishing right angle welds on stainless steel. The advantages of this system are easier access, faster stock removal and less undercutting than other methods such as grinding wheels, cut down wheels, coated abrasive square and cross pads and other products frequently used to finish fittings, manways, frames and bracing.
