Smart Watch User Manual Please carefully read the user manual to ensure safety.
English 01 Deutsch 08 Français 15 Español 22 Italiano 29 Português 36 Русский 43 日語 50
English An Introduction to Device Power Key 1.Short press to brighten the screen 2.
English APP Binding Press and hold the power button to start the machine, scan the QR code to download the GloryFit app for pairing , and set the watch in the app. Notes: 1. Please ensure that your mobile Bluetooth and GPS are turned on prior to connection; 2.Do not directly pair mobile Bluetooth with watch; 3.Support (1) Android 5.0 and more advanced systems; (2) IOS 10.0 and more advanced systems 1.Please turn your mobile Bluetooth and GPS on; 2.
English Wear / Replace Keep a certain distance away from carpus when wearing the watch, and adjust to a comfortable tightness. Switch on and remove wrist strap Note: 1. Too loose wearing may affect the data accuracy of heart rate; 2. Keep its surface clean and dry. Interface Operation Instructions 1.
English 2. Interface Operation Find Your Phone, Brightness Adjustment, Do Not Disturb, About the Device (model, MAC/version) Status Bar Main Interface Step Counting Sleep Heart Rate Message Bar Remark: Slide right and left to enter the shortcut interaction interface; slide up to enter the message notification bar interface and slide down to enter the status settings bar. Remark: Slide right to exit under the sports mode.
English 3.
English Notes for Safety and Product Information 1.Battery Alarm Do not damage battery via shape items, and do not disassemble it without authorization; 2.Health Alarm If you are wearing implantable electronic devices such as pacemakers, please consult your doctor before heart rate measurement; Equipped optical heart rate sensor flashes green light.
English 5.Declaration of Conformity The device conforms to FCC Part 15. All operations should match the following two conditions: 1)The device won’t lead to any harmful interference; 2)The device must accept all interference that can be received, including all interface that may lead to unnecessary operations. All changes or modifications that aren’t clearly approved by the compliance party may make users fail to operate the device. According to FCC Part 15, the device has passed test.
Manufacturer's Name: Shenzhen Huafurui Technology Co., Ltd. Address: Unit 1401 & 1402, 14/F, Jinqi Zhigu Mansion (No. 4 Building of Chongwen Garden), Crossing of the Liuxian Street and Tangling Road, Taoyuan Street, Nanshan District, Shenzhen, P.R. China Product Name: SmartWatch Trade Mark: CUBOT,HAFURY Model number: N1 Operating Temperature: -10° C to 40° C This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
DECLARATION OF CONFORMITY I hereby declare that the product SmartWatch Model: N1 Brand name: CUBOT,HAFURY (Name of product, type or model, batch or serial number) System components: Battery: Rechargeable Li-ion Battery; Manufacturer: ZHONGSHAN ZHONGWANGDE NEW ENERGY TECHNOLOGY Co.,LTD Model: W005; Specification: DC 3.7V, 450mAh Antenna Manufacturer: Shenzhen Huafurui Technology Co., Ltd. Model: Type: FPC Antenna Gain: 1.
Address: Köningswinkel 10 D-32825 Blomberg Germany Identification Number: 0700 MANUFACTURER or AUTHORISED REPRESENTATIVE: Address: Shenzhen Huafurui Technology Co., Ltd. Unit 1401 & 1402, 14/F, Jinqi Zhigu Mansion (No. 4 Building of Chongwen Garden), Crossing of the Liuxian Street and Tangling Road, Taoyuan Street, Nanshan District, Shenzhen, P.R. China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative.
