User Manual

ELECTRICAL CONNECTION
Before operating the machine, check that your home voltage is the one stated in the technical sheet of this
manual and that the system is earthed. Never use any other type of supply.
The Manufacturer disclaims any liability for damage to persons or property owing to the failure to follow this
rule. Where necessary, use a plug adapter, making sure that it is suitable for the supply lead.
USE OF THE MACHINE
Before each time of use: Follow the instructions given in the “Warnings” page of the “Cleaning” paragraph.
1 - Set the machine on a suitable surface.
2 - With the safety guard lifted as illustrated, put the plug in the socket and press the switch to position ( I ).
3 - Lower the safety guard thereby enabling the machine to start.
4 - Position the mobile guards leaving the stretching rollers uncovered.
5 - The dough must be kept at room temperature.
6 - Turn the adjustment knob to position 6 (max roller opening) and insert part of the previously prepared
dough between the stretching rollers. This will obtain a first shaping of the sheet. Fold it in two and pass it
through the rollers again to make it homogeneous.
7 - To reduce the thickness, turn the adjustment knob to position 5, then gradually to the lower numbers, still
passing the sheet obtained between the rollers.
8 - For an optimum result it is advisable to sprinkle the dough with flour on both sides every time it goes bet-
ween the puller rollers.
9 - To cut the sheets, move the mobile guards leaving the required cutter rollers uncovered, rest one end of
the sheet on the rollers to obtain cutting.
MANUAL ACCESSORIES OF THE IMPERIA LINE THAT
CAN BE ADAPTED TO PASTA PRESTO
(Fig.2)
I - IMPERIA SIMPLEX (single cutter)
L - IMPERIA DUPLEX (double cutter)
M - IMPERIA RAVIOLI MAKER
N - IMPERIA MILLEGNOCCHI (gnocchi maker)
MANUAL USE OF ACCESSORIES
(Fig.4)
Before each time of use: follow the instructions given in the “Warnings” page of the “Cleaning” paragraph.
“SIMPLEX/DUPLEX” CUTTERS
Rest one end of the sheet obtained previously on the cutter rollers, insert the handle in the slot of the device
and turn clockwise to obtain the cutting action.
RAVIOLI MAKER
1 - Fold in half the sheet prepared previously, insert it between the hopper rollers until it touches the ravioli
maker rollers. With a 1/4 of a turn of the handle, move the sheet under the rollers.
2 - Carefully open the two edges of the sheet resting them on the sloped surfaces of the hopper.
3 - Place a rather restricted quantity of filling inside the sheet.
4 - Turn the handle and replenish the filling inside the sheet as soon as it is lacking.
“MILLEGNOCCHI” GNOCCHI MAKER (Fig.5)
Prepare a well amalgamated, smooth and soft mixture, form long cylinders (like breadsticks).
Flour well, choose the required pasta shape and pass them through the wooden rollers turning the handle
clockwise.
Before each time of use: follow the instructions given in the “Warnings” page of the “Cleaning” paragraph.
All accessory fitting and removing operations are to be carried out with the power plug disconnected.
1 - Set the machine on a suitable surface.
2 - Raise the safety guard.
3 - Connect the required accessory to the retainer fins provided on the machine.
4 - Insert the handle provided in the slot present on all accessories.
This procedure is the same for all the manual devices shown on this page with the letters I, L, M, N.
FITTING ACCESSORIES
(Fig.3)
6