Specifications

How to set up
1. In the custom-made rice taste function, press the “warm/reheat” button. the custom-made
warming mode
will be entered. At the same time, press the preset button. The display will
be shown as below.
2. When entering the custom-made warming mode in bed, press the “Hr/SOAK” button.
display will be fixed and press the custom-made rice taste function to set up.
3. After entering the custom-made warming mode, if you do not press the any other buttons
within 7 seconds, the function will go back to the previous cancelled function.
4. You have to set up the product to put your taste.
1. In the custom-made rice taste function, press the warm/reheat button. the custom-made
warming mode
will be entered. At the same time, press the preset button. The display will
be shown as below.
2. When entering the custom-made warming mode in bed, press the Min/HEAT button.
display will blink and then press the custom-made rice taste function to relase.
3. After entering the custom-made warming mode in bed, press the “Cancel” button or do not
press any button for 7 seconds, then function will go back to the prior cancelled function.
If you need to keep the rice warm while you are sleeping, do not use this function. This function
makes the rice cooler than normal. In summer, the rice can go bad and smells because of high
temperature if possible do not use the custom-made warming mode while sleeping.
When opening the lid, if a lot of water spills or If the rice is too soft, this is when you use this.
1. When opening the lid, if too much water is spilt : Press “Hr/SOAK” button to raise the setting mode about 1~2 step.
2. If the edge of rice is too soft : Press button “Min/Heat” to reduce the setting mode about 1~2 step.
-2 Press “Min/HEAT” button to change the
display as
Select the menu you want, then the press the
“My Mode” button and set-up time will be
automatically entered with a buzzer sound.
(If you do not press a button within 7
seconds, the function will go back to the
previous function.)
-1 Press “Hr/SOAK” button to change the
display as
Press “warm/reheat” button in my mode.
(Refer to page 15) The display of mark
will be changed by a buzzer sound.
mark is first mark.
How to apply the warm temperature to my mode.
How to keep warm during sleep
When keeping the rice warm for long time, set up the temperature low to prevent the following quality of rice:
smell, dry, change of color; from PM10:00 ~ AM 04:00.
How to release