Specifications

51
CUE Product Catalog 2007, Version 2, April 1st, 2007 www.cuesystem.com
Tx Element Transmitters
MAin feAtures
Two and four buttons models available
Innovative solutions in newly designed installations
No need to cut the walls because of control wire installations
Very fast installation - mostly not longer than a few minutes
Clean and dustless installation without wet processes
Encoded signal, no opportunity to misuse or interfere
Sufcient coverage for all typical applications
Control from points normally dangerous for electric installa-
tions (bathtubs, inammable base, etc.)
Best-selling design series of ABB switches
Very long lifetime of lithium battery
•
•
•
•
•
•
•
•
•
•
Buttons
2 for Tx Element 2
4 for Tx Element 4
Wireless communication
Radio frequency 433.92 MHz
Max. range 60 m
Number of codes 2
24
+ 2
32
(H)
Automatic limitation of transmission time 25 s
Power supply
Lithium battery 3 V, CR 2430
Battery lifetime up to 10 years
Physical
Plastic enclosure
Protection IP20
Dimensions 88 x 81 x 16 mm / 3.5” x 3.2” x 0.6”
Weight 0.1 kg / 0.2 lb
Operating environment
Temperature -10° to 55° C
Humidity 10% to 90% non-condensing
sPecificAtions descriPtion
The Tx Element transmitter is designed to correspond with the
new range of ABB switches with elegant oval frames, and it is
possible to use it either by itself or in various multiple frames
combining its different colored designs. The at push button is
mechanically divided into two or four parts. The transmitter is
powered by lithium 3 V battery, and it is possible to mount it
practically everywhere - on ammable surfaces, near a child’s
bed, on a sink, on the glass, etc., yet there is no risk of injury be-
ing caused by electricity or risk of re. The transmitter is mounted
using screws or double-sided adhesive tape. All wall transmitters
consist of a frame and a ngerboard. If you install more trans-
mitters at one place, it is good to use multiple frames - for more
information please contact [e-mail].
APPlicAtions
Complete residential home automation
Complete building automation
Commercial single-room and multi-room applications
Reconstructions and later installations
•
•
•
•
order inforMAtion
Tx Element 2
Tx Element 4
Product codes
2 buttons
4 buttons Color
White / Ice White
White / White
White / Ice Grey
Caramel / Ice Grey
Ivory / Ice White
Agave / Ice White
Stormy / Ice grey
Carmine / Ice grey
CS0312.401
CS0312.403
CS0312.404
CS0312.407
CS0312.421
CS0312.422
CS0312.423
CS0312.424
CS0313.401
CS0313.403
CS0313.404
CS0313.407
CS0313.421
CS0313.422
CS0313.423
CS0313.424
APPlicAtion note
For system connection use Rx1 DIN /Data Wireless Receiver,
product code CS0318.401. The receiver can be connected to
ipCUE controllers using RS-232 bi-directional communication
port.
Transmitter
CE Declaration
RoHS Declaration
Data Sheet
stAndArd box contents