Specifications
65
CUE Product Catalog 2007, Version 2, April 1st, 2007 www.cuesystem.com
ipCUE Rack Mounting Kit
The ipCUE Rack Mounting Kit provides
simple solution for installing ipCUE con-
trollers and rfbaseCUE to the 19” rack. It
allows install two half-rack sized ipCUEs or
one full-sized ipCUE to single 19” unit rack
space. All necessary accessories are supplied
with the kit.
Stainless steel enclosure
Dimensions Rack 19”, 1 U
Weight 1.3 kg / 2.9 lb
Product code CS0251-MR
The IR Adapter /i is an infrared emitter used
for controlling AV devices equipped with
IR control capabilities. It is fastened on the
receiver window of the AV device using a
double-sided adhesive tape.
Connector 2-pin 3.5 mm
Cable length 2 m / 6.6 ft
Product Code CS0256
IR Adapter /i
Any status indicator on the controlled device
can be read using the Opto-Input Adapter /i
photosensitive cell. The Opto-Input Adapter /
i is fastened on the indicator using a double-
sided adhesive tape.
Connector 2-pin 3.5 mm
Cable length 2 m / 6.6 ft
Product Code CS0257
Opto-Input Adapter /i
CUEwire Cable
The CUEwire Cable is used for CUEwire
connection.
Connectors
4-pin 5.08 mm, 4-pin 5.08 mm
Product codes
CA0140-P05 length 0.5 m / 1.6 ft
CA0140-P30 length 3.0 m / 9.8 ft
CA0140-PU user cable length
CUEring Cable /i
The CUEring Cable /i is a data cable that
enables communication between controllers
and interfaces.
Connectors
5-pin 3.5 mm, DB-9-male
Product codes
CA0170-P05 length 0.5 m / 1.6 ft
CA0170-P30 length 3.0 m / 9.8 ft
CA0170-PU user cable length
Serial IO Cable /i
The Serial IO Cable allows system connectiv-
ity to controlled devices that are equipped
with RS-232, RS-422 or RS-485 serial com-
munications. The connector and pin descrip-
tion need to be specied. This information,
as well as the communication protocol, can
typically be found in the user manual of the
controlled device. If the equipment cannot be
found in our library, and the connector is not
explicitly described in your order, the cable
will be delivered without a connector.
Connectors
5-pin 3.5 mm
Output connector depends on device
Product codes
CA0180-P05 length 0.5 m / 1.6 ft
CA0180-P30 length 3.0 m / 9.8 ft
CA0180-PU user cable length
Serial IO Cable DTE /i
The Serial IO Cable DTE /i allows system
connectivity to controlled devices that are
equipped with RS-232 serial communication.
Connectors
5-pin 3.5 mm, DB-9-M
Product codes
CA0181-P05 length 0.5 m / 1.6 ft
CA0181-P30 length 3.0 m / 9.8 ft
CA0181-PU user cable length
Serial IO Cable DCE /i
The Serial IO Cable DCE /i allows system
connectivity to controlled devices that are
equipped with RS-232 serial communication.
Connectors
5-pin 3.5 mm, DB-9-F
Product codes
CA0182-P05 length 0.5 m / 1.6 ft
CA0182-P30 length 3.0 m / 9.8 ft
CA0182-PU user cable length
Universal Serial Cable Adapter
The Universal Serial Cable Adapter allows
to connect serial controlled device equipped
with any signal conguration on DB-9-F or
DB-9-M connector. Cable connection can be
simply changed by jumpers.
Connectors
5-pin 3.5 mm, DB -9-M
Supplied accessories
Cable to ipCUE (length 1m)
Cable to controlled device (length 0.5m)
Product code
CS0271