Specifications

Product Catalog, January 2012
www.cuesystem.com
Tx Element Transmitters
M F
• Two and four buttons models available
• Innovative solutions in newly designed installations
• No need to cut the walls because of control wire installations
• Very fast installation - mostly not longer than a few minutes
• Clean and dustless installation without wet processes
• Encoded signal, no opportunity to misuse or interfere
• Sufficient coverage for all typical applications
• Control from points normally dangerous for electric installations
(bathtubs, inflammable base, etc.)
• Best-selling design series of ABB switches
• Very long lifetime of lithium battery
Buttons
2 for Tx Element 2
4 for Tx Element 4
Wireless communication
Radio frequency 433.92 MHz
Max. range 60 m
Number of codes 224 + 232(H)
Automatic limitation of transmission time 25 s
Power supply
Lithium battery 3 V, CR 2430
Battery lifetime up to 10 years
Physical
Plastic enclosure
Protection IP20
Dimensions 88 x 81 x 16 mm / 3.5” x 3.2” x 0.6”
Weight 0.1 kg / 0.2 lb
Operating environment
Temperature -10° to 55° C
Humidity 10% to 90% non-condensing
S D
The Tx Element transmitter is designed to correspond with the new
range of ABB switches with elegant oval frames, and it is possible to
use it either by itself or in various multiple frames combining its different
colored designs. The flat push button is mechanically divided into two
or four parts. The transmitter is powered by lithium 3 V battery, and it is
possible to mount it practically everywhere - on flammable surfaces, near
a child’s bed, on a sink, on the glass, etc., yet there is no risk of injury
being caused by electricity or risk of fire. The transmitter is mounted using
screws or double-sided adhesive tape. All wall transmitters consist of a
frame and a fingerboard. If you install more transmitters at one place, it is
good to use multiple frames - for more information please contact sales@
cuesystem.com.
A
• Complete residential home automation
• Complete building automation
• Commercial single-room and multi-room applications
• Reconstructions and later installations
Tx Element 2
Tx Element 4
O I
Product codes
2 buttons
4 buttons Color
White / Ice White
White / White
White / Ice Grey
Caramel / Ice Grey
Ivory / Ice White
Agave / Ice White
Stormy / Ice grey
Carmine / Ice grey
CS0312-401
CS0312-403
CS0312-404
CS0312-407
CS0312-421
CS0312-422
CS0312-423
CS0312-424
CS0313-401
CS0313-403
CS0313-404
CS0313-407
CS0313-421
CS0313-422
CS0313-423
CS0313-424
A N
For system connection use Rx1 DIN /Data Wireless Receiver, product
code CS0318-401. The receiver can be connected to
ipCUE controllers using RS-232 bi-directional communication port.
Transmitter
Warranty Conditions, CE Declaration
RoHS Declaration
Data Sheet
S B C