Specifications

Product Catalog, January 2012
www.cuesystem.com
PEF150
M F
• Compatible with ballasts DALI
• Possibility to control up to 64 dimmable ballasts for fluorescent lamps
divided up to 15 independent groups
• Possibility to control of all 15 groups by PEbus
• Possibility to control two groups or possibility to recall four light
scenes by external buttons
• Test buttons on front panel
• Programmable parameters
• Indication of power supply, PEbus activity, output level and DALI
communication activity
• DALI bus can be powered from PEF150, programmable by PEX
software
• Unified enclosure designed for DIN rail installation
• Easy installation, small dimensions
D
The PEF150 is exclusively designed interface for fluorescent lamp
dimming ballasts with DALI (Digital Addressable Lighting Interface)
protocol. This protocol offers the possibility to individually address up
to 64 regulating ballasts on a single bus and up to 15 independent
groups. The control of all groups is performed by PEbus. PEF150 is
compatible with DALI ballasts produced by major manufacturers such
as Philips, Osram, Triondic, Helvar, etc. The unit can be controlled by
PEbus and by potential free contact inputs. Potential free contact inputs
offer a control of two groups by external buttons or recall four different
scenes. The same function is possible with test buttons located on the
front panel. The programmable parameters are input response, minimum
and maximum output level of light and dimming speed, light scenes. One
of the advantages is that there is no need to connect dimming ballasts
into groups since all of them are connected by a twin-core cable and
later with the software configuration is determined in which group the
luminary will belong to. This means that the light configuration can be
easily changed after a room light modification. The light configuration is
performed by PEX program. As far as the bus control is concerned each
group is assigned an address as to other units and then the group follows
standard CUE commands for light. The front panel includes LED indicators
for the power supply and output level. The enclosure allows simple
installation on a DIN rail.
A
• Commercial single-room applications
• Meeting rooms, conference rooms, boardrooms
• Huge multi-room and multi-floor distributed systems
• Complete residential home automation
• High-tech homes
Control ports
4x Potential free contact input, terminals 1.5 mm2
1x DALI up to 64 dimming ballasts, terminals 1.5 mm2
Control up to 15 independent groups
System communication
2x PEbus, RJ-11 connector
LED indicators
Power / PEbus activity
Two groups output levels
DALI communication activity
Power supply
110 or 230 VAC, 50 / 60 Hz, 12 W
Physical
Plastic DIN rail compatible enclosure
Dimensions
71 x 90 x 58 mm / 2.8” x 3.5” x 2.3”
4 DIN modules 17.5 mm
Weight 0.3 kg / 0.7 lb
Operating environment
Temperature 0° to 60° C
Humidity 10% to 90% non-condensing
S
S B C
PEF150
PEbus cable
Warranty Conditions, CE Declaration, RoHS Declaration
Data Sheet, Cue System Connector Wiring Sheet
CUE Application CD
O I
Product codes
CS0249-1 version 110 VAC
CS0249-2 version 230 VAC