Specifications

Product Catalog, January 2012
www.cuesystem.com
M F
• Ethernet IP enabled controller with power relays
• Control ports - bi-directional serial, IR/serial, general I/O, digital I/O,
power relay
• Non-volatile flash memory for user application
• Onboard real time clock
• Firmware upgradable using Admin Web pages
• Fully compatible with current CUE communication buses
• Web server and Admin Web pages for setup and diagnostics
• IR code capture
• Front panel indicators for each control port
• Unified enclosure designed for DIN rail installation
• Compatible with Cue Visual Composer programming only
ipCUE-sigma
A
• Complete residential entry-level automation
• High-tech homes
• Commercial single-room applications
• Meeting rooms, conference rooms, boardrooms
• Huge multi-room and multi-floor distributed systems
S
Control ports
4x Bi-directional serial RS-232/422/485, 5-pin connector
3x IR /serial output (IR up to 1.2 MHz), 2-pin connector
8x General I/O, 9-pin connector, can be configured as
Analog input 0 – 20 V, 10-bit AD converter
Digital open collector output, max. 24 V / 80 mA
12x Digital I/O, 13-pin connector, can be configured as
Digital input contact closure / TTL, max. input voltage
24 V, threshold 2 V
Digital open collector output, max. 24 V / 80 mA
Power ports
8x Potential free relay NC-C-NO, 230 or 110 V, max. 10 A
for resistive loads. Max. 400 W per relay for inductive or capacitive
loads. Terminals 1.5 mm2
Power output
5 VDC, max. 1 A, 2-pin connector
12 VDC, max. 400 mA, 2-pin connector
Internal IR sensor
IR code capture
LED indicators
Power, CUEnet, CPU, all control ports
Button
Reset / Set factory default
8x Test button for power relay control
Real time and date
RTC with battery backup
Memory
Internal RAM 16 MB, Internal flash 16 MB
Software technologies
Admin Web, XPL2 Inside
System communication
10/100 BaseT Ethernet , RJ-45 connector
Power supply
24 VDC (+/-20%), 24 W, 2-pin connector
Physical
Plastic DIN rail compatible enclosure
Dimensions
210 x 90 x 58 mm / 8.3” x 3.5” x 2.3”
12 DIN modules 17.5 mm
Weight 0.5 kg / 1.1 lb
Operating environment
Temperature 10° to 40° C
Humidity 10% to 90% non-condensing
D
The ipCUE-sigma is a member of Ethernet IP enabled controller family.
The control ports include bi-directional serial channels RS-232/422/485,
serial outputs, infrared outputs up to 1.2 MHz, general I/O ports, that
can be configured as analog inputs or digital outputs, digital I/O, that
can be configured as digital inputs or digital outputs, and 110/230 volts
relay outputs. The Ethernet port allows for bi-directional IP control of any
manufacturer IP enabled products.
The ipCUE-sigma is fully compatible with CUE‘s existing range of button
panels and touch panels through and comes equipped with a CUEwire
port. For convenience there has also been
a 5 VDC and 12 VDC outputs added to the design for powering external
low-voltage equipment.
The ipCUE-sigma is equipped with internal IR sensor which allows capture
IR codes. Convenient for testing and troubleshooting this model also
comes with front panel buttons for direct control of relay outputs and it
comes also with indicator LEDs that indicate the status of all the control
ports. The ipCUE-sigma keeps date and time with its onboard real time
clock (RTC) and thus allowing for a wide variety of distributed intelligence
scheduling applications.
The ipCUE-sigma comes complete with a web server and allows for
setup, configuration, and testing through a standard web browser. This
web-based interface allows for the graphical monitoring and control
of all ports, which provides a truly time saving method for testing and
troubleshooting.