Specifications

Table Of Contents
Product Catalog, January 2012
www.cuesystem.com
CUEring Cable /i
The CUEring Cable /i is a data cable that enables communication
between controllers and interfaces.
Connectors
5-pin 3.5 mm, DB-9-male
Product codes
CA0170-P05 length 0.5 m / 1.6 ft
CA0170-P30 length 3.0 m / 9.8 ft
CA0170-PU user cable length
Serial IO Cable /i
The Serial IO Cable allows system connectivity to controlled devices that
are equipped with RS-232, RS-422 or RS-485 serial communications. The
connector and pin description need to be specified. This information, as
well as the communication protocol, can typically be found in the user
manual of the controlled device. If the equipment cannot be found in our
library, and the connector is not explicitly described in your order, the
cable will be delivered without a connector.
Connectors
5-pin 3.5 mm
Output connector depends on device
Product codes
CA0180-P05 length 0.5 m / 1.6 ft
CA0180-P30 length 3.0 m / 9.8 ft
CA0180-PU user cable length
Serial IO Cable DTE /i
The Serial IO Cable DTE /i allows system connectivity to controlled
devices that are equipped with RS-232 serial communication.
Connectors
5-pin 3.5 mm, DB-9-M
Product codes
CA0181-P05 length 0.5 m / 1.6 ft
CA0181-P30 length 3.0 m / 9.8 ft
CA0181-PU user cable length
Serial IO Cable DCE /i
The Serial IO Cable DCE /i allows system connectivity to controlled
devices that are equipped with RS-232 serial communication.
Connectors
5-pin 3.5 mm, DB-9-F
Product codes
CA0182-P05 length 0.5 m / 1.6 ft
CA0182-P30 length 3.0 m / 9.8 ft
CA0182-PU user cable length