Specifications

Table Of Contents
Product Catalog, January 2012
www.cuesystem.com
M F
• Controls multiple IR controllable devices
• Amplifies and emits infrared control signal
• Power supply 5 VDC directly from controller
• Compact and small black plastic enclosure
• Wall Mounting Adapter available
IR Sprayer
S D
The IR Sprayer amplifies and emits infrared control signal from controller’s
IR / serial output. It allows control multiple IR controllable devices by
single transmitting unit. The IR Sprayer is equipped with 2 m cable
and two 2-pin connectors. White labeled connector serves for signal
connection (IR / serial output on controller), red labeled connector is
power supply and it can be connected to controller power output 5 VDC.
In that case no additional power supply is required. The IR Sprayer can
be simply fastened on the flat surface using a double-sided adhesive
tape. For more flexible installation a Wall Mounting Adapter is available.
Connection
To controller’s IR /serial output, 2-pin connector
Power supply
5 VDC, 1 W, 2-pin connector
Physical
Black plastic enclosure
Dimensions
44 x 33 x 22 mm / 1.7” x 1.3” x 0.9”
Weight 0.1 kg / 0.2 lb
Operating environment
Temperature 10° to 40° C
Humidity 10% to 90% non-condensing
A
• Commercial single-room applications
• Huge multi-room and multi-floor distributed systems
• Home theater applications
• Complete residential home automation
O I
Product codes
CS0295 IR Sprayer incl. cable
CS0299 IR Sprayer Wall Mounting Adapter
incl. accessories
S B C
IR Sprayer incl. cable and connectors
Double-sided adhesive tape
Warranty Conditions, CE Declaration, RoHS Declaration
Data Sheet, Cue System Connector Wiring Sheet
A A
The IR Sprayer Wall Mounting Adapter allows flexible installation on the
wall, ceiling, furniture, etc. and must be ordered separately using product
code CS0299. The adapter is supplied incl. all necessary mounting
accessories - screws, wall plugs, etc. The IR Sprayer is simply fastened to
the adapter using a double-sided adhesive tape.
IR Sprayer Wall Mounting AdapterIR Sprayer installed on Wall Mounting Adapter