® INSTRUCTION/RECIPE BOOKLET Buona Tazza™ Single Serve Espresso, Caffe Latte and Cappuccino Machine EM-350C SERIES For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. To protect against fire, electrical shock and injury to persons do not immerse the appliance, cord or plug in water or any other liquid. This appliance is for household use only. Do not operate the unit with the brewing head open. Do not use this appliance for anything other than its intended use.
Turn the box so that the backside of the machine is down, and slide the espresso maker from the box. After the espresso maker has been removed, place the box and the side pulp-molded inserts out of the way. Remove all packing materials, tape, etc. 4. 5. 6. CONTENTS 4 Remove the sample pack of illy® iperEspresso® capsules. 3.
Make sure the drip tray and grate are in place. Place a mug on the drip tray. Press the Manual button and allow the water to run through for approximately 5 to 10 seconds. Press once more to stop. Position espresso cups on the warming plate. The machine is now in preheat/ready mode and ready to use. 4. 5. 6. 7. 8. Always make sure you have water in the reservoir, a capsule in the brew head, and that the appropriate tray is being used.
Auto-Off Mode Following the 30-minute Energy Saver cycle, if there is an additional 30 minutes of non-use, the espresso machine will turn off. Press the power button to turn on again. Energy Saver Mode After 30 minutes of non-use the espresso machine will automatically switch to sleep mode and all the control lights will be dimmed by about 50%. When any button is pressed, the espresso machine will return to preheat mode and all the lights will flash.
If still not hot enough at hotter setting: with no capsule in the brew head, use the manual button to dispense a cup of water to preheat, then make your espresso as indicated on page 6. Problem: SHORT /LONG buttons flash quickly; all buttons are non-functional; or some buttons are off. Solution: • Indicates the coffee boiler has shortcircuited or detects low temperature. Recover the unit by unplugging it and let the unit cool down for approximately 10 minutes. • Problem: Coffee is not hot enough.
5. 3. 4. 1. 2. ½ 1 illy® iperEspresso® capsule cup (125 ml) cold skim milk Put a mug on the latte/cappuccino tray. Using the lever, open the brew head, insert the capsule and close the brew head. Put the milk into the stainless pitcher. Press the Steam Button. Once the button stops flashing, submerge the steam wand into the pitcher of milk to steam. Gently use an up and down motion to keep wand submerged but slightly toward the top of the milk to produce a nice foam.
5. 4. 3. ½ 2 6 6 1. 2. 2 ® ® Lungo or Long illy iperEspresso capsules [equal to 3⁄4 cup (175 ml) brewed espresso] cup (125 ml) cold skim milk tablespoons (30 ml) granulated sugar heavy cream ice cubes* ice cubes Put a mug on the latte/cappuccino tray. Using the lever, open the brew head, insert the capsule and close the brew head. Press the Long button to brew espresso. When the brewing process is complete, insert a new capsule into the brew head and press Long again.
2. 1. 28 ¼ 1½ 2 1 ¼ 1 container [8 ounces (230g)] mascarpone cheese, room temperature cup (250 ml) chilled heavy cream cup (60 ml) plus 2 tablespoons (30 ml) confectioners' sugar tablespoons (30 ml) plus 1 teaspoon (5 ml) dark rum, divided cups (375 ml) brewed espresso, cooled Savoiardi (crisp Italian ladyfingers) cup (60 ml) unsweetened cocoa powder, for garnish Beat the mascarpone in a medium bowl using a Cuisinart® hand mixer until lightened and slightly whipped.
We warrant that this Cuisinart product will be free of defects in materials or workmanship under normal home use for 2 years from the date of original purchase. This warranty covers manufacturer’s defects including mechanical and electrical defects. It does not cover damage from consumer abuse, unauthorized repairs or modifications, theft, misuse, or damage due to transportation or environmental conditions. Products with removed or altered identification numbers will not be covered.
