Warranty

5
CLEANING & MAINTENANCE
1. Be sure plug has been removed from outlet.
2. Remove can opener lever by lifting and pulling
toward you. Use caution, as the blade will be sharp.
3. Wash by hand with hot, soapy water. Dry thoroughly.
4. Wipe body of can opener with damp cloth. (Caution:
Do not immerse in water.)
5. Replace can opener lever by holding in the raised posi-
tion and pushing back into place. Be sure the lever is
pushed all the way in before lowering lever.
6. Maintenance: Any other servicing should be per
formed by an authorized service representative.
SUGGESTIONS
This can opener will open all standard size cans.
It should not be used on cans that have alternate
methods of opening (including but not limited
to pull-tabs, rolling key and peel-off foil). It also
should not be used with rimless cans or cans
with angled corners.
Cans with aluminum lids will not adhere to magnet.
If there is a dent in the rim of the can, open other
side or place the Power Cut
®
blade beyond the dent.
If the can opener stalls, use a light touch to turn the
can to aid the cutting process.