OUTDOOR PREP TABLE Model NO: CGWM-094 Customer Service Hotline 1-866-994-6390 DO NOT RETURN YOUR TABLE TO THE STORE Before visiting your local retailer, call our customer service department at 1-866-994-6390 from 9:00 am to 5:00 pm Eastern time, Monday through Friday.
SAFETY INFORMATION WARNINGS AND USAGE ----------------------------------------------------------------------------------IMPORTANT: ALL INSTRUCTIONS AND SAFEGUARDS IN THIS SECTION MUST BE FOLLOWED TO PREVENT DAMAGE AND/OR INJURY. • • • • • • • • • • Not for permanent installation. For outdoor use only Use caution with all electric appliances, tools, extension cords and lights on and around table. Surface can become hot in direct sun or high temperatures.
WHAT’S IN THE BOX COMPONENTS ----------------------------------------------------------------------------------PART DESCRIPTION QTY PART DESCRIPTION QTY 1 Counter Top Assembly (x1) 9 Garbage Bag Ring (x1) 2 Tool Hook (x4) 10 Garbage Bag Support (x1) 3 Side Panel (x2) 11 Rear Support (x1) 4 Left Back Leg (LB) (x1) 12 Name Plate (x1) 5 Left Front Leg (LF) (x1) 13 Shelf (x1) 6 Paper Towel Bar (x1) 14 Right Back Leg (RB) (x1) 7 Towel Bar End (x2) 15 Right Front Leg
EXPLODED VIEW 4
ASSEMBLY PREPARATION Please be careful when handling components. Always wear work gloves during assembly and set up. Read and follow all safety statements, warnings, assembly instructions and use and care instructions before attempting to assemble and use. Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, DO NOT attempt to assemble the product.
ASSEMBLY INSTRUCTIONS STEP 2 ----------------------------------------------------------------------------------Use screw assemblies to attach the middle portion of left back leg (4) (LB) and the right back leg (14) (RB) to the shelf (13) as shown below. • Note: it is important to not fully tighten the screws during initial assembly of the parts. Wait until the counter top assembly is installed before fully tightening all screws on the cart.
ASSEMBLY INSTRUCTIONS STEP 4 ----------------------------------------------------------------------------------Use screw assemblies to attach side panels (3) to the left and right leg assemblies using four screws for each).
ASSEMBLY INSTRUCTIONS STEP 5 ----------------------------------------------------------------------------------Use screw assemblies to attach name plate (12) to the left front leg (5) (LF) and the right front leg (15) (RF). Next use screw assemblies to attach the rear support (11) to the left back leg (4) (LB) and the right back leg (14) (RB).
ASSEMBLY INSTRUCTIONS STEP 6 ----------------------------------------------------------------------------------Use screw assemblies to attach the garbage bag support (10) to the right leg assembly using the two previously installed screws and the slotted upper holes. Then install two screws in the lower holes to secure in place.
ASSEMBLY INSTRUCTIONS STEP 7 ----------------------------------------------------------------------------------Use screw assemblies to attach both of the towel bar ends (7) to the left leg assembly.
ASSEMBLY INSTRUCTIONS STEP 8 ----------------------------------------------------------------------------------Install the paper towel bar (6) between the two towel bar ends (7) by flexing them slightly outward inserting bar and releasing.
ASSEMBLY INSTRUCTIONS STEP 9 ----------------------------------------------------------------------------------Use screw assemblies to attach the counter top assembly (1) to the prep station base. Now tighten all screw assemblies that have been installed throughout the unit.
ASSEMBLY INSTRUCTIONS STEP 10 ----------------------------------------------------------------------------------Install the tool hooks (2) by screwing them into the front edge of the counter top assembly (1). Place the garbage bag ring (9) into the garbage bag support (10).
CONNECTION INSTRUCTIONS STEP 11 ----------------------------------------------------------------------------------Once the completed prep table is in its’ desired location use the threaded posts of the casters (8, 16) to level the table and lock nuts with the double-ended open wrench (BB) to hold the adjusted position.
GARBAGE BAG INSTRUCTIONS STEP 18 ----------------------------------------------------------------------------------Install a garbage bag by inserting the bag through the garbage bag ring (9) and then wrapping the open end of the bag around the ring. Feed the bottom of the bag through the garbage bag support (10) and then place the garbage bag ring (9), with the opening of the bag wrapped around it, into the garbage bag support (10).
WARRANTY AND REPLACEMENT PARTS 1 Year Limited Warranty PROOF OF PURCHASE is required to access this warranty program, which is in effect from the date of purchase. Customers will be subject to parts, and shipping and handling fees if unable to provide proof of the purchase or after the warranty has expired. If you have any questions or problems, you can call our customer service department at 1-866-994-6390 from 9:00am to 5:00pm EST, Monday through Friday for assistance.
