Quick Reference

Electric Steam Sterilizer

QUICK REFERENCE GUIDE

Remove the measuring cup

from the sterilizer lid.

Lift off the sterilizer lid and

set it aside.

Slide the stem through the

lower tray to assemble, then

place them in the sterilizing

chamber.

Lift the upper tray by the cen-

ter post in the middle of the

tray and slide it over the stem

attached to the lower tray in

the steaming chamber.

Place the bottles neck

downward into the designated

areas on the lower tray. Note:

The tray hold up to 6 of the

largest bottles available.

Fill the measuring cup with

water to the ll line on the side

of the measuring cup (100mL),

then pour it into the sterilizing chamber.

NOTE: DO NOT EXCEED the

recommended amount of water.

PAGE 1
QUICK REFERENCE GUIDE Electric Steam Sterilizer 1. Remove the measuring cup from the sterilizer lid. 3. 2. Lift off the sterilizer lid and set it aside. Fill the measuring cup with water to the fill line on the side of the measuring cup (100mL), then pour it into the sterilizing chamber. NOTE: DO NOT EXCEED the recommended amount of water. 4. Slide the stem through the lower tray to assemble, then place them in the sterilizing chamber. 5. 6.
PAGE 2
STERILIZING Continued 7. 8. 9. 10. 11. 12. Loosely scatter the unassembled components on the upper tray. (It is important that all bottle parts are disassembled before adding them to the upper tray for proper sterilization). Turn the dial to ON and the LED light will illuminate to indicate the sterilizing has begun. The unit and the LED light will shut off automatically once sterilizing is complete. Turn the dial to the OFF position.