Owner Manual

10
long beep denoting the activation of
the child-lock state.
To unlock: Press STOP/CLEAR for 3
seconds. There will be a long beep
denoting that the lock is deactivated.
10.
Cooking End Signal
When the cooking is over, the buzzer
will sound 5 beeps to signal that the
cooking is finished.
11.
Multi-section Cooking
The microwave can be programmed
to cook on 2 different power levels for
the duration of a cooking cycle. For
example, if you want to cook with
80% microwave power for 5 minutes
and then 60% microwave power for
10 minutes, follow these steps:
1. To select 80% microwave power,
press POWER repeatedly until PL8
is displayed.
2. Press the number buttons “5”, “0”,
“0” to set the cooking time.
3. To select 60% microwave power,
press POWER repeatedly until PL6
is displayed.
4. Press number buttons “1”, “0”, “0”,
“0” to set the cooking time.
5. Press START/+30 SEC to start
cooking.
12.
Pre-Set Function
The microwave can be programmed
to start in advance. For example, if the
time of day is 7pm the microwave can
be set to start cooking at 9pm. First
select either the power level and time
or auto menu options of your choice
(see page 8 and 11 for instructions).
Follow steps below to set the Pre-Set
function:
1. Press CLOCK/PRE-SET and enter
the time of day to begin program
cooking (for example, 9.00).
2. Press the start button.
3. The clock icon on the LED display
will flash until the unit operates at
the pre-set time.
To cancel the Pre-Set function,
press STOP.
13.
Inquiring Function
During use the microwave CLOCK/
PRE-SET, POWER, and AM/PM
buttons can be pressed to inquire
current status or setting.
1. AM/PM button: In the clock setting
the AM/PM button can be pressed
to display either A or P time setting.
2. CLOCK/PRE-SET button: During
cooking operation when the
CLOCK/PRE-SET button is pressed
the LED will display the clock for
three seconds and the AM/PM for
another three seconds.
3. In pre-set state, the LED will display
the clock and the seconds will be
flashing at the same time. Press
AM/PM and either A or P will be
displayed for 3 seconds. Then
press CLOCK/PRE-SET to inquire
the pre-set time. The pre-set time
will be flashing for three seconds,
the AM/PM will be displayed for
another three seconds. The oven
will then turn back to the clock
state setting.
4. During cooking when the POWER
button is pressed, the current
microwave power will be displayed
on LED for three seconds. After
which the oven will return to
previous state.
14.
OTHER SPECIFICATIONS
a. In standby state, if the set clock
digital tube displays current time,
the icon “ : ” would flash; otherwise,
it shows “0:00”.
b. In setting function state, LED
displays corresponding setting.
c. In working or pause state, LED
displays remainder cooking time.