INSTRUCTION BOOKLET Recipe Booklet Reverse Side Blend and Cook Soupmaker SBC-1000 For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
17. Regarding your cord set: A longer cord has been provided so that you will have flexibility in positioning your blender. Exercise care when using the longer cord to avoid entangling or tripping over the cord. The longer cord should be arranged so that it will not drape over the counter or tabletop, where it can be pulled on by children or tripped over. 18. Wash the blender jar, jar collar with black assembly, lid and measuring cup before first use. 19.
SAVE THESE INSTRUCTIONS UNPACKING INSTRUCTIONS Place the gift box containing your Cuisinart FOR HOUSEHOLD USE ONLY 1. blender on a flat, sturdy surface before unpacking. ® 2. Remove instruction booklet and other printed materials from the top of corrugated insert. Next remove the top corrugated insert. SPECIAL CORD SET INSTRUCTIONS NOTICE 3. Carefully lift blender base from box and set aside.
FEATURES AND BENEFITS 12. Heavy-Duty Cleaning Brush to help clean heating plate and blades thoroughly. 1. Press-on Lid Tightfitting seal resists leakage and vents in lid opening allow steam to escape. 13. BPA-Free (not shown) All parts that come in contact with food are BPA-free. 2. Lid Opening Allows you to add ingredients when measuring cup is removed from lid. 3. 2. 1. 3. Removable Measuring Cup Allows you to measure up to 3 ounces of ingredients to add through the lid opening. 4.
ASSEMBLY Fig. 1 e. ® To use your Cuisinart Blend and Cook Soupmaker, begin by assembling the blender jar. 1. Place jar collar with blade assembly (a) on a flat, sturdy surface. d. 2. Carefully place the rubber gasket (b) inside the jar collar. 3. Place the blender jar (c) on the collar and turn clockwise until tight. Fig. 2 c. Note: Blades are sharp. Handle carefully. 4. Place lid (d) on jar and push until secure. Place measuring cup (e) in the lid opening and press into lid. 5.
GETTING TO KNOW YOUR CONTROL PANEL 1. 5. 4. 6. 2. 3. 1. Power On/Off Button – Press the button to turn on. The red LED light will flash; the unit is now in Standby mode. If the On/Off button is pressed while in Standby mode, the unit will turn off. in one-minute increments, up to 30 minutes. (Note: If – button is pressed first, 30 minutes will be displayed.) Hold button down to scroll through minutes, or press and release to advance one minute at a time. 2.
COOKING AND BLENDING 1. Place the motor base of your blender on a flat, sturdy surface. It is important that the surface be clean and dry. Assemble the blender by following the Assembly instructions (page 4). Once the jar is assembled and is in position on the motor base, plug the blender into an electrical outlet. 2. Press the On/Off button. The blender is now in Standby mode. 3. Select the required time per the recipe.
CAUTION: When removing the jar use caution. The area underneath the collar may be extremely hot. Place the blender jar, lid, rubber gasket and measuring cup in the upper rack of the dishwasher or wash in warm, soapy water; rinse and dry thoroughly. To thoroughly clean the heating plate, we recommend that you use the cleaning brush that is included with your blender. Be sure to let the heating plate cool before cleaning with the cleaning brush, as the brush is not heatproof.
accessories, replacement parts, or repair service other than those that have been authorized by Cuisinart. These warranties do not cover any damage caused by accident, misuse, shipment, or other than ordinary household use. These warranties exclude all incidental or consequential damages. Some states do not allow the exclusion of or limitation of incidental or consequential damages, so the foregoing limitation may not apply to you.
