Quick Reference

PG-26829
To program the Auto On:
Press and hold the PROG button until clock
begins to flash. Set the time you want
coffee to begin brewing (follow “set the
time” instructions). Once desired Auto On time is set,
Auto On setting mode will be exited automatically. To
activate Auto On mode press the PROG button and the
green indicator light will come on to remind you that
the programming function is in use.
2.
4.
To start the brew cycle at the same time
the next day, simply press PROG button
and release. The green indicator light will
illuminate.
3.
At the programmed time, the red ON
indicator light will come on, indicating that
the brew cycle is starting.
5.
To program the Auto Off: Press
and hold Auto Off button until clock begins
to flash. Use the Hour and Minute buttons as
in #1 (to set the time) to program your
coffeemaker to shut off from 0 to 4 hours
after brew cycle is finished.
To set the time: Press and hold the
Hour or Minute button until the clock begins
flashing. Hold down the Hour or Minute
button to scroll through the numbers. When
desired time approaches, release the button and
press repeatedly to advance one digit at a time. To
finish, wait for the numbers to stop flashing.
1.
programming
QUICK REFERENCE GUIDE
Please see reverse side for setup and use instructions.
IMPORTANT!
Do not throw away. Read before
operating your new coffeemaker.
Keep for further reference.
These helpful hints are intended
to be a supplement to the instruction
booklet. In order to ensure proper operation
and optimum performance, please read the
entire instruction booklet.