COFFEE BAR™ Coffee Grinder Models DCG-20 and DCG-20BK
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. READ ALL INSTRUCTIONS. 2. To protect against risk of electrical shock do not immerse cord, plug or grinder in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, before removing coffee and before cleaning. 5. Avoid contacting moving parts. 6.
SAVE THESE INSTRUCTIONS NOTICE: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. OPERATING INSTRUCTIONS 1. Plug cord into outlet. 2. Remove lid from base of grinder.
. 3. 2. 5. 1. 6. 7. 1. On/Off Button 2. Lid 3. Stainless Steel Blades 4. Measurement Markings 5. Stainless Steel Bowl 6. Grinder Base 7.
CLEANING/STORAGE INSTRUCTIONS 1. Be sure that grinder plug has been removed from outlet. 2. Wipe inside of stainless steel bowl and lid with damp paper towel. Dry completely. If desired, lid may be washed in warm water or in the top rack of a dishwasher. Never immerse the grinder base unit in water or other liquid. 3. Store excess cord by pressing a section at a time into the cord storage area in the base of the unit. Up to 2 feet of cord can be stored.
GRINDING SUGGESTIONS: Some general guidelines for grinding are listed below. However, times will vary depending upon the amount of coffee used and your personal preference. The best way to determine how coarse or fine to grind your coffee is to experiment with different grinds and coffee types to suit your taste.
