Operating instructions

4. With the stem facing
down, place the
assembly over the
centre hub. It should fit
snugly and rest on the
bottom of the work bowl.
5. Place work bowl cover
onto work bowl, with
the handle area just to
the left of centre. Turn
counterclockwise to
lock onto work bowl.
6. Align pusher with the
feed tube opening on
the work bowl cover and
slide the activating rod
down to the bottom.
7. Use the cord wrap
on the housing base
underside to add or
remove cord.
8. You are now ready to
operate the machine.
THE MACHINE
FUNCTIONS:
PULSE
1. With the machine
properly assembled
and engaged, and
ingredients in the
work bowl, press the
PULSE button
repeatedly as needed.
ON (Continuous)
1. Properly assemble and
engage the machine.
2. To add ingredients
through the feed tube,
remove the pusher and
fill the feed tube as
directed (see preparing
for slicing or shredding).
3. Engage the pusher
and press the ON
button. The button light
will turn on and the
motor will start.
4. Press the pusher firmly
down until all ingredients
have passed into the
work bowl.
Remove the pusher
and refill ingredients
as needed. When you
engage the pusher
again, the unit will
automatically turn ON.
5. Press the OFF button
when finished.
DOUGH Button
1. Prepare the dough
ingredients and place
in work bowl.
2. Properly assemble and
engage the work bowl
cover and pusher.
3. Press the DOUGH
button and the light
will turn on.
4. Then press the ON or
PULSE buttons as
needed to process
DOUGH. The ON light
will turn on.
NOTE: The dough mode
works in conjunction with
the ON button. The machine
will not operate if only the
DOUGH button is pushed.
Y ou must also push the
ON button to activate the
DOUGH function.
5. Press the OFF
button when finished.
OPERATING
INSTRUCTIONS:
Try chopping some practice
foods, such as zucchini
or potatoes, before you
process food to eat. First,
cut the ingredients into
2.5cm pieces of even size
and length.
• Place the work bowl
over the centre stem,
with the handle area
just left of centre.
Turn counterclockwise
to lock in place.
• Insert the metal chopping
blade and put ingredient
pieces in the work bowl.
Put on the cover and turn
counterclockwise to lock
onto work bowl. Align the
pusher and the pusher’s
activating rod with the
corresponding openings
on the feed tube, and
push all the way down.
• Press and release the
PULSE button two or
three times. Each time
the blade stops, let the
pieces drop to the bottom
of the bowl before you
pulse again. This puts
them in the path of the
blade each time the
motor starts.
• Using the pulse/chopping
technique, you get an
even chop without
overprocessing. Check
the texture frequently
by looking through the
cover. If you want a finer
chop, press and release
the PULSE button until
you achieve the desired
texture. Onions and other
food with a high water
content will quickly end
up as a purée, unless
examined through the
work bowl after each
pulse to make sure they
are not overprocessed.
Try chopping other food like
meat for hamburger
or sausage. Then make
mayonnaise, pastry or
bread, as described in
the following sections. To
obtain consistent results:
• Be sure all the pieces
you add to the bowl are
about the same size.
• Be sure the amount you
process is no larger
than amount recom-
mended on the inside
cover of this booklet.
Before you do anything,
wait for the blade to stop
7