Deluxe Two Burner Gas Grill ASSEMBLY INSTRUCTIONS Model GAS0256AS / GAS0256ASO
ASSEMBLY INSTRUCTIONS: READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN ASSEMBLING THIS UNIT.
16 15 19 14 18 13 11 17 12 10 8 6 7 4 4 2 3 1 5 9 2
FRONT PANEL Step 1 2 • Remove 4 screws • Attach FRONT PANEL 2 parts • 2 Install 4 screws 2 Step 2 • Loosen 10 screws • Attach FRONT LEGS 1 and 3 • Tighten 10 screws on FRONT LEGS 1 and 3 3 1 3 NOTE: Before tightening keyhole screws, make sure panels are aligned.
Step 3 • Loosen 4 screws • Attach SIDE PANELS 4 • Tighten 4 screws on SIDE PANELS 4 4 4 Step 4 • 1 Remove 2 screws Remove 4 screws from FRONT LEGS 1 and 3 3 Remove 2 screws 4
Step 5 • Remove 4 screws from CART BASE 5 5 CART BASE Step 6 • Attach TANK HOLDER 9 to CART BASE 5 with 4 screws (Removed from Step 5) 9 5 CART BASE 5
Step 7 1 3 • Attach CART BASE 5 to FRONT LEGS 1 and 3 • Tighten 4 screws on CART BASE 5 (Removed from Step 4) CART BASE 5 Front of Grill Tighten 4 screws Back of Grill Step 8 • 7 Remove 2 screws Remove 4 screws from REAR LEGS 6 and 7 6 Remove 2 screws 6
Step 9 • Loosen 4 screws • Attach SIDE PANELS 4 to REAR LEGS 6 and 7 • 4 Tighten 4 screws on SIDE PANELS 4 4 7 6 Step 10 • • Attach CART BASE 5 to REAR LEGS 6 and 7 6 CART BASE Tighten 4 screws (Removed from Step 8) 5 7 7
Step 11 • Lock CASTERS 17 • Attach CASTERS 17 to legs CASTERS 17 unlocked locked Step 12 • Loosen 6 screws on all 4 legs • Rotate FRONT CART BRACKETS upwards and tighten screws • Slide REAR CART BRACKETS upwards and tighten screws Front Legs Rear Legs 8
Step 13 • Remove 14 screws Remove 14 screws Step 14 • 9 Set GRILL BODY 16 on cart (Use two people) GRILL BODY 16
Step 15 • Tighten 3 screws (Removed in Step 13) GRILL BODY 16 Tighten screws Step 16 • Tighten 3 screws (Removed in Step 13) GRILL BODY 16 Tighten screws 10
Step 17 • • Attach RIGHT SIDE TABLE BRACKETS 18 and LEFT SIDE TABLE BRACKETS 19 to GRILL BODY 16 Tighten 8 screws (Removed in Step 13) 16 18 19 SIDE TABLE BRACKETS Step 18 • Remove 4 screws from SIDE TABLE BRACKETS 18 and 19 • Attach LEFT SIDE TABLE 15 on post and replace screws through slotted hole 18 19 Remove 4 screws 15 LEFT SIDE TABLE 11 16
Step 19 • Attach RIGHT SIDE TABLE 14 on post and replace screws through slotted hole 14 RIGHT SIDE TABLE Step 20 • Remove 2 screws on GREASE TRAY 10 • Move handle to outside attach with 2 screws 10 12
Step 21 • Insert GREASE TRAY 10 and GREASE CUP 11 10 11 Step 22 • Loosen screw on HOSE HOOK and rotate horizontal • Place hose into HOSE HOOK • Tighten screw 13
Step 23 13 12 8 • Install HEAT TENTS 8 , COOKING GRATES 12 and WARMING RACK 13 Model GAS0256AS Assembled AI0256AS/ASO 1019 ©2019 The Boltz Group LLC Carrollton, Texas 75006 U.S.A.